How Do You Reset The Radio On A 2003 Honda Accord?

by | Last updated on January 24, 2024

, , , ,


Turn the ignition key to the “On” position

, but don't start the engine. Turn the on by pressing in on the volume control knob. After 10 seconds, turn the radio off.

How do I unlock my 2003 Honda Accord radio?


Press the preset buttons 1 and 6 at the same time while turning on the radio

. A 10 digit serial number will appear on the radio display. If you have a 2001 or older Honda the serial number is located on the body of the radio unit. the radio unit will have to be removed to see the code.

How do I reset my Honda Accord radio?

  1. Turn the ignition key to the “On” position, but don't start the engine.
  2. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.

How do I get the radio code for my Honda Accord?

There are a few different ways for you to find your specific Honda Accord radio code:

Check the inside of your glovebox or owner's manual for the code

. It should be on a sticker with the radio serial number. Visit the Service Center at Westbrook Honda and have one of our certified technicians locate the code for you.

How do you unlock a Honda radio without the CODE?

If the radio is showing ERR instead of CODE,

turn off the vehicle and disconnect the black cable on your battery for one to three minutes

. This step will reset the system.

How do you fix the radio error on a Honda Accord?

If the radio displays and error (ERR) message,

disconnect the black negative under hood battery cable for 1 to 3 minutes

to reset the system). TURN THE RADIO BACK ON AND LOOK FOR THE WORD “CODE”. ENTER THE 5 DIGIT RADIO CODE. THE RADIO SHOULD COME BACK ON.

How do I unlock my car radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio.

Press and hold down the audio power button together with the SEEK button for about 50-60 minutes

. Then, it will turn on without entering the radio code.

Can I get radio code from VIN number?

The code is located on a card that comes with the original purchase of the vehicle, which we don't have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle

and ask for the radio code

.

How do I bypass my Mitsubishi radio code?

If your Mitsubishi factory radio says “OFF” or “CODE” when you turn it on you need to unlock it's anti-theft feature. If it says “OFF

” turn the key to ACC for 5 minutes with the radio on

, and displaying “OFF”. After 5 minutes the radio will turn itself off. Turn the key off then back on again.

How do I unlock my radio?

  1. Locate the anti-theft/unlock code. Most cars have a special anti-theft radio card that is included with the owners manual packet containing the unlock code and serial number. …
  2. Turn the car's ignition switch to the “on” position. This turns on your car's electrical system and powers up the radio.

How do I reset my Honda audio system?

  1. Turn the ignition key to the “On” position, but don't start the engine.
  2. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.

How do you reset the radio on a 2004 Honda Accord?

Turn the radio on with the control knob and turn it off after 10 seconds pass. THen,

hold the power button for

around 5 seconds and keep an eye on the radio display. You should get a screen that's asking for a code. Enter Your radio code and it should now be reset.

How can I get the code for my car radio?

The best place to locate a radio code is in the owner's manual of your car. In most cases, the owner's manual will be located in your glove box and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.

How do you unlock a Ford Fiesta radio without the code?

To unlock it,

turn the stereo switch to ON and hold button 6 for ten seconds

. If it doesn't work or you see LOCKED 13, that means the unit is permanently locked.

Why is my radio locked?

A lockout code

protects against radio theft

. If a thief disconnects the radio, the code locks the radio up, rendering it useless. However, it's not much of a safeguard because the thief usually doesn't know that the code has been tripped until he powers up the radio after he has removed it from the vehicle.

How do I reset my car stereo system?

  1. Remove the faceplate from your car stereo.
  2. Press the RESET button on the front panel using a pointed object, such as a ball-point pen.
Emily Lee
Author
Emily Lee
Emily Lee is a freelance writer and artist based in New York City. She’s an accomplished writer with a deep passion for the arts, and brings a unique perspective to the world of entertainment. Emily has written about art, entertainment, and pop culture.