Press the “Manual Override” button three times
. This will cause the light to blink. Hold down the “Manual Override” button until the light stops blinking and turns off. This resets the service light.
How do you reset the maintenance light on a Polaris Ranger?
- Press and hold the MODE button to enter the settings menu.
- Press either toggle button to cycle to the “Service Hours” option. Press MODE to select.
- Press MODE to reset the existing value and exit or press either toggle button to change the value.
What does the wrench light mean on a Polaris Ranger?
A flashing wrench symbol
alerts the operator that the preset service interval has been reached
. Your Polaris Dealer can provide scheduled maintenance.
How do you clear the wrench on a Polaris ATV?
Press the
“Mode/Reverse Override” button
to scroll through the menu functions on the display until you have reached the service interval function. Select the service interval function by holding the “Mode/Reverse Override” button for three seconds until the service wrench icon begins to flash.
How do you clear a wrench light?
- With your key in position 2 (or your push-button pressed with your foot off the brake), power up your Mazda without the vehicle running.
- On your touchscreen/main menu, scroll to Applications —> Vehicle Status Monitor —> Maintenance —> Oil Change —> Reset.
How do you reset the service light on a Polaris Ranger 570?
- Press and hold the MODE (4) button to enter the settings menu.
- Press either toggle button (5) to cycle to the “Service Hours” option. Press MODE to select.
- Press MODE to reset the existing value and exit or press either toggle button to change the value.
How do I check the miles on my Polaris Ranger?
The hour meter on the Ranger EV is found
below the battery discharge indicator and above the indicator lights on the vehicle console
. Sometimes, it can also be found in the instrument cluster’s Display Area 2.
What is the Polaris reverse override switch?
The reverse override is
a safety feature to keep you from killing yourself in reverse
. It cuts out the ignition if you get too fast and the 4×4 as well unless you press the button.
What does the wrench symbol mean on a 4 wheeler?
It indicates that it is
time for a maintenance/oil/filter change
.
When should I change the oil in my Polaris Ranger?
Perform a break-in oil and filter change at
25 engine hours or one month of use
— whichever comes first. Following break-in, change your oil and filter every 100 hours, six months or 1,000 miles — whichever comes first.
What does the yellow wrench light mean on a Ford?
The wrench warning light on Ford vehicles is
the powertrain malfunction indicator light
. When it illuminates, it means that the computer has detected an issue with your vehicle’s powertrain or four-wheel-drive system.
What does the wrench light mean on dashboard?
These symbols tell you when a certain feature is being used or when your car needs minor maintenance. A few common Honda Accord indicator lights include: … Maintenance MinderTM Indicator Light: A yellow wrench on your dashboard means your Honda Accord is
due for routine maintenance
.
What does orange wrench light mean?
It means
you need to change car oil and oil filter
. If oil is really low, it will display OILLIFE and % in the odometer display. You will not see your usual mileage display until oil is changed, unless you manually reset your display.
How do you check the codes on a 2019 Polaris Ranger?
To access the codes,
put trans in Neutral and turn the key switch on and off 3 times, leaving it on the third time
. The codes will start to display.
How do you enter the code on a Polaris Ranger?
To access the codes,
put trans in Neutral and turn the key switch on and off 3 times, leaving it on the third time
. The codes will start to display.
How do you find the code on a 2011 Polaris Ranger?
- If the error codes are not displayed, use the MODE button to toggle until “Ck ENG” displays on the main line of the display.
- Press and hold the MODE button to enter the diagnostics code menu.
