The collar will beep or blink in series to indicate the new shock level. Press the button again within 5 seconds to raise the level once more. Continue
until the
collar indicates it is at the correction level you desire. To lower the correction level, continue pressing the button; the level will cycle back to 1.
How do I change the correction level on my invisible fence collar?
Can I adjust my pet’s correction at the Invisible Fence control panel? No. The correction level on your pet’s collar can only be
changed by a trainer or technician in the field or at the counter of your local dealer
. The Computer Collar is set based on your pet’s personality as assessed by our certified trainers.
How do I change the level on my petsafe collar?
Increase the Static Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the previous flashes
. The Static Correction Levels increase from 1 to 5. Pushing the Correction Level Button while the Receiver Collar is on level 5 will cause the Receiver Collar to revert to level 1.
How do you adjust a dog shock collar?
The remote control has a big orange button which is your shock button. To adjust the shock intensity level,
hold down the shock button and twist the knob on the top left of the remote
. This can go up to 99, so you can always adjust the correction level if you’re worried about frightening or hurting your dog.
Does an invisible dog fence have to make a complete loop?
The answer is no,
an electric fence DOES NOT have to make a complete loop
. … Creating a continuous loop will increase voltage on the fence line, because power is pushed in both directions. Essentially, with a continuous loop, voltage only has to travel half the distance.
How do I make my invisible fence collar stronger?
The collar will beep or blink in series to indicate the new shock level.
Press the button again within 5 seconds to raise the level once more
. Continue until the collar indicates it is at the correction level you desire.
How do I adjust my Petsmart collar?
Increase the Static Correction Level by
pressing and releasing the Correction
Level Button within 5 seconds of the previous flashes. The Static Correction Levels increase from 1 to 5. Pushing the Correction Level Button while the Receiver Collar is on level 5 will cause the Receiver Collar to revert to level 1.
Why does a shock collar not work on my dog?
Proper fit is crucial for the e-collar to have any impact on your dog. If BOTH contact points are not touching the dog’s skin, the dog will not perceive any sensation at all. This happens because the
collar is on the dog too loose
. … If the e-collar is easily rotating around the dog’s neck, it is too loose.
What level should I set my shock collar?
The collar strap should be
tight enough that the contact points are applying light pressure on your dog’s neck
but it shouldn’t be able to slide or re-position itself on your pet’s neck. You may have to take a few minutes to get the right adjustment, but this step is very important when working with e-collars.
How tight should my dog’s shock collar be?
A flat collar
should fit comfortably on your dog’s neck
; it should not be so tight as to choke your dog nor so loose that they can slip out of it. The rule of thumb says you should be able to get two fingers underneath the collar.
How deep do you bury invisible fence wire?
If you are planning on burying the wire we recommend a depth
between 3′′ and 24′′
– burying the wire too deep may begin to alter the signal strength and risks running into other buried lines on utilities in your yard.
How do you layout an invisible fence?
The answer is no,
an electric fence DOES NOT have to make a complete loop
. … Creating a continuous loop will increase voltage on the fence line, because power is pushed in both directions. Essentially, with a continuous loop, voltage only has to travel half the distance.
Will my neighbors invisible fence interfere with mine?
Q. Will my neighbors’ invisible fence interfere with mine?
Neighboring invisible fences can interfere with each other
. Two wires that run too closely together can cancel each other’s signal, effectively allowing your dogs to travel back and forth between yards.
Why is Invisible Fence bad?
The prongs on the collar can injure the skin. … Wild animals, cats, other dogs or even people (especially children) can easily wander into your yard, which can result in injuries to everyone involved. Invisible fences also
do little to protect dogs from being stolen or harmed by people with bad intentions
.
How do I know if my Invisible Fence collar is working?
A light on the battery tester and audible tone on the receiver confirms
that the collar is operating properly. If you get the audible warning but not a light, replace the battery.
What collars work with Invisible Fence Brand?
The
Perimeter Technologies Computer Receiver Collar
is designed to replace your Invisible Fence brand R21 collar or add a new pet to your existing Invisible Fence system for a fraction of the cost. The Perimeter Computer Receiver Collar will work with your existing Invisible Fence brand 7K or 10K dog fence system.
