How Do You Start A 1998 Dodge Ram 1500 Without The Key?

by | Last updated on January 24, 2024

, , , ,

Place the fob right next to your finger and using your finger, again turn the ignition switch . This time the warning lights will come on and the warning tones will sound. Keep your finger in the switch and the fob next to it for a few seconds and the truck will start up.

How can I start my truck without a key?

Remove the screws that are holding the electrical part (the part with the wires) and the mechanical part of the ignition switch together. Insert a flat-head screwdriver into the key hole and turn in the same direction as you would your key. This will start your car.

Does a 98 Dodge Ram have a chip in the key?

Premium Member. DODGE manufactured after 1998 then you probably have a RFID SENTRY COMPUTER CHIP TRANSPONDER KEY . This includes the Stratus, Caravan, Intrepid, Magnum, Durango, Neon, Dakota and, Ram Trucks.

How do you start a Ram truck with a dead key fob?

How do you start a RAM truck with a dead key fob? This is the same process as when you need to start it without your key fob. Get the regular key out of the back of the fob, press it against the ignition, press the brake and you’re good to go ! You can also replace your key fob battery and use the fob.

Can I start my Dodge Ram with a key?

How do you start a RAM truck with a dead key fob? This is the same process as when you need to start it without your key fob. Get the regular key out of the back of the fob , press it against the ignition, press the brake and you’re good to go! You can also replace your key fob battery and use the fob.

How do you start a Dodge Ram 1500 without the key?

If you sit in the truck and look at the dash, you will see that there is a green ring that lights up around the start icon. If you simply put your foot on the brake and keep it there , the truck will start without the key fob being present.

What year did dodge start using chipped keys?

CHRYSLER DODGE JEEP CHIP KEYS. Chrysler, Dodge, Plymouth and Jeep began using transponder chip keys in 1998 .

How much does it cost to replace a Dodge Ram key?

In short, replacing a Dodge Ram key can cost between $125 to $450 . The cost depends on a number of factors: The type of key you need.

How do you unlock a Dodge Ram 2020?

  1. Method #1: Use a tennis ball.
  2. Method #2: Use your shoelace.
  3. Method #3: Use a coat hanger.
  4. Method #4: Use a rod and a screwdriver.
  5. Method #5: Use a spatula.
  6. Method #6: Use an inflatable wedge.
  7. Method #7: Use a strip of plastic.

How do I know if my RAM has remote start?

So how do you know if you have remote start on your vehicle? The easiest way to check is to look at your key . There will be a button with a ‘x2’ with an arrow moving in a circular direction.

Can I roll down my windows with my key fob?

Lower All Windows Instantly: One of the more common hidden functions on many of today’s key fobs is the ability to roll down all the windows and open the sunroof at the same time by pressing a single button. It’s handy, and it helps cool off the car on a hot summer day.

How do you start a Dodge with a dead key fob?

  1. Turn the fob over to reveal the latch located at the TOP BACK of the fob.
  2. Slide the latch to the side then REMOVE the key.
  3. Use the key to UNLOCK the vehicle door.
  4. Place the key fob on the START button, PUSH in and press the BRAKE to start the vehicle.

How do I fix remote start disabled?

Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.

Can you start car with screwdriver?

Can You Start a Car With a Screwdriver? Unless you have a very old automobile (like pre-1990), no . Even with those older cars, an ignition is very unlikely to turn over with a screwdriver alone.

How do I reprogram my RAM key fob?

Turn your key to the ON position, but don’t start the engine. For 4-10 seconds, press and hold both the “unlock” button and the “panic” button simultaneously . Release both buttons, and listen for a chime. Press and release the “unlock” button on any other remotes you want to add within 30 seconds of hearing the chime.

Does a 2007 Dodge Ram have a chip in the key?

If your Dodge Ram Pickup Truck was made in the years 2002, 2003, 2004, 2005, 2006, 2007, or 2008, then your truck requires a transponder chip key . Besides cutting the key, you will need to have the key programed to your truck.

Juan Martinez
Author
Juan Martinez
Juan Martinez is a journalism professor and experienced writer. With a passion for communication and education, Juan has taught students from all over the world. He is an expert in language and writing, and has written for various blogs and magazines.