Put the key in the ignition and turn it to the on position. Watch for the airbag light to illuminate. It should stay illuminated for about 7 seconds and turn off. After it turns off, turn the switch off and wait 3 seconds.
Is it illegal to drive with airbag light on?
Is it safe to drive with an SRS light on? ... It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your safety system isn’t working at 100% and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.
Why does the airbag light stay on?
The airbag warning light should only stay on when there’s a problem with the airbag system in the car . ... If the airbag hasn’t been deployed, the light will come on when the system senses that it cannot activate the airbag; this means that there is some sort of a problem with the airbag system in your vehicle.
How much does it cost to reset the airbag light?
This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600 .
How do I get my airbag light to turn off?
- Turn on the ignition switch with your car key. ...
- Wait for the airbag warning light to turn off. ...
- Turn the ignition switch of your car back off for a little longer than three seconds.
- Repeat steps 1 through 3 twice to make three times total.
Can you sell a car with the airbag light on?
You can sell it , but if someone asks about the airbag light, you should tell them what you know about it.
What does the airbag light look like?
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person . It will normally light up briefly each time you start your vehicle, and then go off.
Will disconnecting battery reset airbag light?
Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. ... Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.
Can you reset airbag light with OBD2?
OBD2 scanner can read fault car code and reset SRS. ... However, you need to buy an OBD2 scanner that is capable of reading SRS light codes and resetting it . There are many OBD2 scanners on the market. They work with 1996 and newer models and can solve not just SRS issues but other basic and advanced problems as well.
Can you sell used airbags?
They’re automotive recyclers (colloquially known as junkyards), which retrieve never-deployed airbags from scrapped autos and sell them as replacement parts to collision repair shops. It’s perfectly legal — and, critics say, very dangerous.
Can a blown fuse cause the airbag light to come on?
Blown fuses can definitely cause the airbag light to come on . ... When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.
How do I know if my airbag sensor is bad?
You can easily tell if the sensor is functioning if the airbag warning light on the dashboard is illuminating every time you start the vehicle . But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.
What happens if I take airbag fuse out?
Every vehicle I’ve worked on has had an airbag fuse you can remove from the fuse panel to fully disable the airbag ; the repair manuals recommend pulling this fuse when doing any work in the dash area since there’s some risk of triggering the airbags to go off while you’re working, which could result in serious injury ...
Can you clear airbag codes?
No, scanners cannot clear these codes . These codes are stored after a vehicle accident and are also known as crash data. ... Hard Codes require professional reset services like us.
What happens if I remove the airbag fuse?
The dust that comes out of the airbags won’t hurt you, but you don’t want it all over you or in your eyes, either. ... Simply pulling the airbag fuse may not disable the airbags . Many ACMs utilize an internal battery to ensure deployment even if the power is cut.
How do you check airbag codes?
The airbag codes are double digit numbers. To read the codes, count the number of times the light flashes, wait for the pause and count the flashes again . For example, two flashes, a pause and four flashes mean that your airbag system’s problem is a code 24.
