How Do You Unlock A Stock Chevy Radio?

Dial 1-800-537-5140 to connect with GM's toll-free radio hotline

. Once you're connected, you'll be asked to provide your vehicle's radio identification number, along with a special dealer access code. You'll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do I unlock my car radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio.

Press and hold down the audio power button together with the SEEK button for about 50-60 minutes

. Then, it will turn on without entering the radio code.

How do I bypass Theftlock on a GM radio?

1. Put the key in the ignition and turn it to the “On” position. …
2. Press and hold radio preset buttons 2 and 3 for six seconds. …
3. Write this number down quickly and press the AM/FM button (within a 15 seconds). …
4. Write down this second number.
5. Turn the car's ignition off.
6. Call 1-800-537-5140.

How do I get the code to unlock my radio?

1. Check Your Owner's Manual. The best place to locate a radio code is in the owner's manual of your car. …
2. Visit the Manufacturer's Website. …
3. Visit your Local Dealership. …
4. Contact a Local Automotive Audio Installation Center.

How do I unlock my Chevy radio without paying a dime?

Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a

three digit code

appears on the radio display. Write this code down. Step 3: Press the AM/FM button.

How do you reprogram a GM radio?

1. Turn on your car. …
2. Press and hold down both the second and third preset buttons. …
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display.

How do you bypass anti theft radio?

1. Use an original key (not a copied one) and insert it into the ignition.
2. Turn the key into the “On” position. …
3. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
4. Flip the key into the “Off” position and leave it there for five seconds.

Can I get radio code from VIN number?

The code is located on a card that comes with the original purchase of the vehicle, which we don't have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle

and ask for the radio code

.

Why is my radio locked?

A lockout code

protects against radio theft

. If a thief disconnects the radio, the code locks the radio up, rendering it useless. However, it's not much of a safeguard because the thief usually doesn't know that the code has been tripped until he powers up the radio after he has removed it from the vehicle.

How do I get my car out of anti theft mode?

Step 1: Insert the key into the door lock. Use the side door on the driver's side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

How can I stop my car radio being stolen?

1. Explanation: A security-coded radio can deter thieves, as it's likely to be of little use when removed from the vehicle.
2. Category: Safety and your vehicle.
3. References: The Official DVSA Guide to Driving: Section 20.

How do I get the code for my duster radio?

1. Log into your MY Renault account.
2. Click on “Vehicle details” and then scroll down the information section to view “Radio Code”
3. Click on “Reveal Radio Code”

How do I unlock my 2013 GM radio?

To unlock the radio in the 2013 Chevy Silverado You will start

by turning on the vehicle

. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.

How do you reset a locked GM radio?

Enter the numbers “106010” when prompted for

a dealer access code. This is the most common code used by GM personnel to reset locked Theftlock radios. Key in each number carefully, then hit the # sign to send your request through.

How do I reset my Chevy radio 2019?

To reset your Chevy MyLink system entirely,

hold down the Home and Fast Forward buttons simultaneously for 10 seconds

. This should reboot the system and resolve any problems that you're having.