Copper sulfate is used as
a drying agent in the anhydrous form
, as an additive for fertilizers and foods, and several industrial applications such as textiles, leather, wood, batteries, ink, petroleum, paint, and metal, among others. It is used also as an animal nutritional supplement.
How long does it take for copper sulfate to work in a pond?
Treating a pond with copper sulfate for algae control should be done with care to avoid oxygen depletion and possible harm to your fish. After using a copper sulfate algae control product you should notice the algae start to change a brownish or grayish white within
about 24 hours
.
How do you apply copper sulfate to a pond?
You would mix 5 pounds of granular copper sulfate with 3 gallons of hot water,
then spray it over half of your pond
, wait a few days, and spray the other half. Never treat the entire lake or pond at once, as doing so will deplete oxygen levels while vegetation and algae decomposes after dying.
How often should you put copper sulfate in a pond?
3. Application by Slug Method: Make a dump of Copper Sulfate into the irrigation ditch or lateral at 1⁄4 to 2 pounds per second of water per treatment. Repeat about every 2 weeks as needed. A dump is usually necessary
every 5 to 30 miles
depending on water hardness, alkalinity, and algae concentration.
What does copper sulfate do to pond water?
Copper Sulfate is a granulated algaecide great for
treatment of pond and lake algae
and is also suited for treating areas to eliminate swimmer’s itch. Copper Sulfate Algaecide is an effective algae control product that also helps relieve Swimmer’s Itch and leech issues.
How long will copper sulfate last?
Chelated copper algaecides reduce the frequency of treatments because they are effective for
up to 6 weeks after application
. With all chemical treatments, we recommend using only as needed.
Can you eat fish from a pond treated with copper sulfate?
There are no restrictions on swimming
, eating fish from treated water bodies, human drinking water, pet/livestock drinking water, or irrigation. Copper is an element, and so is not broken down like other herbicides.
What happens if you get copper sulfate on your skin?
If absorbed through the skin or eyes copper sulfate may cause
a burning, stinging sensation
. This could result in itching, eczema, conjunctivitis, inflammation, fluid buildup or cornea irritation if exposed to the eyes.
What are the risks of using copper sulphate?
Copper sulfate can
cause severe eye irritation
. Eating large amounts of copper sulfate can lead to nausea, vomiting, and damage to body tissues, blood cells, the liver, and kidneys. With extreme exposures, shock and death can occur. Copper sulfate affects animals in a similar way.
How much copper sulfate should I put in my pool?
IN SWIMMING POOLS
To treat and prevent algae and odors, apply
1 tablespoon of Copper Sulfate for every thousand gallons of pool water
. This will result in a concentration of 1.0 ppm of dissolved copper. Prior to application, the pH of the pool should be 7.2-7.6.
Is copper sulfate safe to use in a pond?
Copper sulfate can be toxic to fish and other organisms
. Copper sulfate results in copper build up in pond sediments and creates a sterile bottom in the pond. Besides many important organisms, it kills beneficial bacteria.
Can I use copper sulfate in my pond?
Copper sulfate should be used as
a pond algae treatment
on actively growing algae in water temperature above 60F. When getting rid of algae in a pond, it is always important to treat 1/2 of the pond algae at a time to avoid killing too much algae and depleting the water of oxygen.
What can I spray on my pond for algae?
Crystal Plex
is a liquid copper sulfate solution designed to control a large variety of algae and some aquatic plants including Hydrilla. Treat when algae is actively growing by spray application. Mix 1/2 gallon of Crystal Plex with 2-3 gallons of water and spray 1⁄2 of your pond.
What does barley straw do for ponds?
How Does Barley Straw Work? Barley straw
prevents the growth of algae
. It does not kill existing algae. Because of this action, it is sometimes called an algistat as opposed to an algicide.
Is copper sulfate bad for cast iron pipes?
Copper sulfate damages metals such as iron, brass and chrome, so keep copper sulfate away from those metals. In addition, never use copper sulfate more than twice a year. The more you use the crystals, the more likely damage will occur to the pipes.
Copper sulfate is a dangerous and toxic substance
.
