Most codes require at
least 15 inches (measured from the center of the toilet)
from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
Are all toilets the same distance from the wall?
Toilet Rough In Dimensions: A toilet's rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are
12 inches
but can be anywhere from 10 to 14 inches in some cases.
How close can a toilet be to a wall UK?
For toilets, it is 15′′ min to meet the code, but most designers will recommend
18′′
which is a more comfortable clearance if there is room to be away from any side obstructions like vanities, wall, bathtub, etc.
Should a toilet touch the wall?
No, there is
no standard
distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12′′ with a few at 10′′ and a few at 14′′, but the actually distance the tank will be from the wall will vary. Yours is quite normal.
What is toilet rough in distance?
Toilet Rough-In Measurements and Standards
Start by measuring the rough-in size. This is
the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor
. It's best to perform this measurement before you remove the old toilet.
Will an elongated toilet replace a round toilet?
An
elongated toilet seat will technically fit on a round toilet
, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
Is it safe to leave a toilet off overnight?
Yes,
absolutely
, fumes can be harmful when replacing a toilet, but they can be kept at a minimum and shouldn't pose a health risk if you work reasonably quickly and keep the drainpipe covered between removal and installation. Sewage gases are toxic and also flammable.
How much space do you need between toilet and shower?
Plan a clear floor space of at
least 30 inches
from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.
How much space is needed for a walk in shower?
The ADA suggests a minimum size of
36 inches by 36 inches
for a walk-in shower, which features a bench attached to one wall for sitting. Even if you eschew the bench, 36 inches by 36 inches is a good minimum size for ease of showering.
What is the smallest toilet you can get?
Tiny Bathrooms Julius Compact Toilet
. The Julius toilet from Tiny Bathrooms is one of the smallest standard-plumbed toilets on our list. It has a depth of just 24 inches, is 14.25 inches wide, and stands 27 inches tall. If you don't want the noise of a macerator, it's about the most compact loo out there.
Can you move a toilet closer to the wall?
Yes, the
14 inch Unifit adapter moves
the toilet 2 inches close to the wall. It may be possible to adjust further.
Can a toilet be placed on an internal wall?
Generally, you can install a toilet on an internal wall
as long as there is enough room underneath the floor to run the waste line to the mainline
. … If there is enough room, the only other requirement is that you have a wall with the proper structural studs in it and cavity space for the piping.
Can you move a toilet away from the wall?
Moving a toilet is not a straightforward weekend DIY job, but it is
very doable when
you involve the professionals. Once the toilet itself is removed, your plumber will have to move the drainage, as well as the water supply to accommodate the new location.
What is the difference between a 10-inch and 12-inch rough-in toilet?
Considerations. When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will
be 2 inches of open space between the tank and wall
. … However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
How do I know the rough-in size of my toilet?
The rough-in measurement of a toilet refers to
the span between the wall behind the toilet and the center of the waste pipe
. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
How much should it cost to have a toilet installed?
On average, a standard toilet installation costs
between $120 and $230
with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $100 to $200 for a total toilet replacement cost of $221 to $427.