Shower controls should be placed
38 inches to 48 inches off the floor
, according to NKBA Bathroom Planning Guidelines.
What is the standard height for shower mixer?
For shower-only controls,
between 36 and 48 inches from the floor
is common. Employ your helper to hold the fixture at an estimated height and then see if it's a comfortable reach for all users.
How high is a shower mixer valve?
Take into consideration whether the controls work the tub and shower, since you'll want to mount them lower to accommodate tub users. For shower-only controls,
between 36 and 48 inches from the floor
is common.
Where should a shower mixer be placed?
Shower controls should be placed
38 inches to 48 inches off the floor
, according to NKBA Bathroom Planning Guidelines. Offsetting the controls toward the front of the shower will make them accessible both inside and outside the water spray.
What height should my shower valve be?
For shower-only controls,
between 36 and 48 inches from the floor
is common. Employ your helper to hold the fixture at an estimated height and then see if it's a comfortable reach for all users.
How far should shower valve sticks out from wall?
The best solution is to install the valve body with the plaster ground
3/8′′ back
from the finished wall. This would provide a 1/8′′ space between the back of the handle and the escutcheon, perfectly acceptable.
What is a rough in shower valve?
The rough-in valve is
the heart of system
. This is the part of your shower system, in-wall faucet or deck mounted tub filler that lives behind the wall, precisely controlling water temperature and volume.
Where should a shower head be placed?
Many experts will tell you that the standard shower head height should be
80 inches above the floor of the bath
. Although this dimension is ideal for most people, a shower head with a long neck can reduce this measurement by some inches.
What is the rough in height for a shower valve?
A height of 28 inches, or
2 feet 4 inches
, is standard for valves in bathtub shower units. For shower stalls, install the valve at the standard height of 48 inches, or 4 feet.
What height should a rain shower head be?
Let's tackle the most important question right away by pinpointing the standard height for a shower head. According to Hunker, the industry standard for how high a shower head should be is
80 inches
. We're talking 80 inches above the floor of the bathroom.
What do you do when your shower valve is deep?
If your shower valve was installed too deep, you may need
to purchase a shower valve extension
. Signature Hardware carries valve extensions for some rough-ins, but not all. Professional installation should factor in the correct depth behind the wall, with any exterior wall covering included.
Should shower valve be centered?
When possible it's best to design a shower with an
off-center drain
. Think about it, if the drain is in the center, you are likely to be blocking it with your feet while you are taking a shower. This can slow the draining process.
Can you replace shower handle without replacing valve?
The handle and trim for the tub/shower controls can also usually be replaced without redoing any plumbing by using
a universal replacement kit
(available for most brands at home centers and plumbing supply stores).
How do I know what shower valve I have?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol
. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.