The Schlage Touch is powered by a 9V battery and because it is a standard electronic lock, the battery life will last
two years
with a low-battery warning that will alert you long before the battery is completely drained.
Does Schlage have a warranty?
Schlage stands behind its products and will continue to do so with a
limited lifetime mechanical and finish warranty
, a three-year limited electronics warranty and dedicated resources, customer support and innovation.
Are Schlage locks guaranteed for life?
Schlage stands behind its products and will continue to do so with a
limited lifetime mechanical and finish warranty
, a three-year limited electronics warranty and dedicated resources, customer support and innovation.
Why is my Schlage lock not working?
In order to reset the keypad, you will have to manually disconnect the device’s batteries. Now, press and hold the
Schlage button
for around 10-15 seconds. Make sure you reconnect the batteries in this time frame as well. The device will reset once you see a green light along with a beep sound from the device.
Whats happens if you lose the code for your Schlage lock?
I lost the programming code and serial number for my Schlage Keypad or Schlage Touch Touchscreen Deadbolt. The programming sticker is available in the user guide, or on the lock itself. However, the lock will need to be
disassembled
to locate the Programming sticker.
How do I know my Schlage Lock?
Check the face of the deadbolt. Most Schlage locks have the company name stamped into the exterior face of the deadbolt.
Check the exterior side of your door to see if the name is stamped on the lock
. If it is stamped with “Schlage,” you know that you’re lock was made by this company.
Is Schlage connect WIFI?
That is, your Schlage Connect Deadbolt now functions over the internet via
a Wi-Fi connection supported
by the hub. And you can lock and unlock the lock, add/delete access codes, check battery level, and more—via the SmartThings app on your phone.
How long should Schlage encode batteries last?
The Schlage Encode comes with a backlit keypad and a traditional keyway. The lock is powered by four AA batteries, set in the back of the lock. The team at Schlage estimates you’ll need to replace the batteries
every six months
.
Which is better Kwikset or Schlage?
Between
Schlage
and Kwikset, there is absolutely no doubt that Schlage makes better locks. … With a better, more precise manufacturing process and 2 additional security pins than the Kwikset deadbolt, Schlage locks are significantly harder to pick, bump or compromise in non-destructive ways.
Why does my Schlage lock keep beeping?
The beeper is there to confirm a successful unlocking or locking of the smart lock when using the keypad, as well as confirming each press of a number. The
alarm is there to ward off any undesirables from entering your house without your permission
.
How do you reset a Schlage Lock?
Reset the Schlage lock by
engaging the reset button if one is available
, or by disconnecting the battery. Once the cover and housing are removed, if the button is there, simply press and hold it until the red light isn’t flashing anymore. Release it and wait until the lock resets itself and the light turns blue.
How do you open a Schlage lock without the code?
- Disconnect the batteries.
- Press and hold the Outside Schlage Button.
- While holding the Outside Schlage Button, Reconnect the batteries.
- Release the Outside Schlage Button.
Why is my Schlage Lock blinking green?
Flashing green Schlage button after entering a code:
The code entered is correct
. Flashing red Schlage button after entering a code: The code entered is incorrect. Continuous blinking red Schlage button: The battery is low.
How do I change my 4 digit Schlage lock code?
Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. and flash three times. Enter a new four-digit code, and
wait for the “Schlage” button
to flash and beep three times. Re-enter the same four-digit code to confirm the change.
Where is the master code on a Schlage lock?
Schlage Keypad Locks
If you take the lock off of the door you will find the master code
on a sticker on the back of the front of the lock
. It is put there for security purposes as it requires you to have the access and ability to remove the lock from the door. The sticker will have three codes on it.
