How Long Should Swimming Pool Plaster Last?

by | Last updated on January 24, 2024

, , , ,

When it comes to durability, both plaster and pool paint are built to hold up against the chemicals in your pool and natural conditions outside of it such as harmful UV rays; however, most pool plaster lasts

15-20 years

, while epoxy pool paint – the longest-lasting type of pool paint on the market – needs to be …

How long does pool plaster last?

When it comes to durability, both plaster and pool paint are built to hold up against the chemicals in your pool and natural conditions outside of it such as harmful UV rays; however, most pool plaster lasts

15-20 years

, while epoxy pool paint – the longest-lasting type of pool paint on the market – needs to be …

How often does pool plaster need to be replaced?

The typical plastered inground pool requires replacing

about every 10 years

.

Can pool plaster last 20 years?

Unfortunately, plaster doesn’t last forever. Depending on how much you use your pool and how well you clean and maintain it, pool plaster can remain viable for anywhere from

seven to 20 years

.

How much does it cost to replace pool plaster?

The typical cost to have a pool replastered is

between $4 and $7 per square foot

. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that’s total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.

What happens if you dont resurface your pool?

If you don’t resurface the pool, which is necessary because it is always exposed to weather,

cracks and an unevenness in the pool surface will

occur and this could lead to algae stains, water leaking and injuries from the uneven surface.

Can you Replaster a pool yourself?

Replastering a pool is certainly not a five-minute job, but that doesn’t mean it’s

not a job you can DIY

. The average gunite swimming pool will need replastering every seven to 12 years, depending on the way in which it was installed and on how well it’s been maintained.

What is the best swimming pool plaster?


Standard white plaster

is the tried and true pool and spa surface finish. White plaster has been around as long as people have been building swimming pools and it remains a popular choice in spite of the myriad of choices that have come into the market in recent years.

What is the smoothest pool finish?


PebbleFina®

– provides the smoothest finish with superior strength and long-lasting durability, made from PTI’s smallest pebble. Choose from 11 different color options. PebbleBrillinace® – combines vibrant glass beads and natural stone to deliver a captivating finish and a uniquely brilliant water color.

What is the longest lasting pool finish?

Though tile is the most expensive pool finish and takes longer to install than plaster and aggregate, it’s the longest lasting pool surface. With proper application and minimal maintenance, tiles should never need to be replaced. Tile pool finishes come in ceramic, porcelain, glass and stone.

How do you know when your pool needs to be resurfaced?

  1. Stains.
  2. Coarse texture.
  3. Leaking.
  4. Chalky residue.
  5. Drops in water level.
  6. Cracks.

How do you repair a chip in a plaster pool?

  1. Drain the pool until water level goes below the repair area.
  2. Remove any loose cement. Chip area down until it is at least 1/4 inch deep.
  3. Use 2 ounces of the LIQUID CEMENT BONDER per 1⁄2 pound of DRY POOL PATCH CEMENT MIX. Add water and mix until it reaches a putty-like consistency.
  4. a.

How do I know if my pool plaster is bad?

  1. Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. …
  2. Surface Stains. …
  3. Roughness. …
  4. Check Cracks. …
  5. Plaster Discolorations. …
  6. Structural Cracks. …
  7. Rust Stains. …
  8. Loss of Pebbles.

How do you smooth out a plaster pool?

  1. Drain the pool. …
  2. Sand the rough areas with 80 grit wet/dry sandpaper and a sanding block. …
  3. Sand the areas a second time with 120 grit wet/dry sandpaper and a sanding block. …
  4. Sand the rough areas a third time with 240 girt wet/dry sandpaper and a sanding block.

What causes pool plaster discoloration?

Some sort of discoloration and scaling occurs when dents are formed in pool layers over time. Scaling and discoloration is also caused by poor water balance chemistry.

High alkalinity and calcium

also cause scaling of pool plaster. … On the other hand, etching is caused by low alkalinity and calcium.

Kim Nguyen
Author
Kim Nguyen
Kim Nguyen is a fitness expert and personal trainer with over 15 years of experience in the industry. She is a certified strength and conditioning specialist and has trained a variety of clients, from professional athletes to everyday fitness enthusiasts. Kim is passionate about helping people achieve their fitness goals and promoting a healthy, active lifestyle.