How Many Bolts Does A 4L60E Transmission Have? - Fixanswer

ICT Billet 4l60e Bell Housing to Transmission Case

8 Bolts

Replace Torx Replacement Set Kit T56 LS1 LM7 LR4 LQ4 LS6 L59 Made in America bell housing 551684.

How many pan bolts does a 4L60E have?

Matt C nailed it –

16 bolts

is the 4L60, 17 bolts is the 4L80.

How many plugs are on a 4L60E transmission?

There are

two different

ECU connectors for the 4L60E.

How many bolts does a transmission have?

There are

seven bolts

that hold the transmission to the engine. The Axle nut can vary, and I think it has a lot to do with whether or not you have bought or have aftermarket/replacement axles for it.

What’s the difference between 4L60 and 4L60E?

The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a

four-bolt pattern

. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.

What years will a 4L60E transmission fit?

Year Ranges Transmission Pan/Filter	1994-1996 4L60E Shallow	1997 4L60E Shallow – Early Deep – Late	1998-2000 4L60E Deep	2001-2003 4L60E/4L65E Deep

How do I know if I have a 4L60E or 4L80E?

Appearance. The 4L80E can be told apart from

the 4L60E by looking at their transmission fluid pan

. This is because the 4L80E has a pan that is oval in shape whereas a rectangular pan is featured by the 4L60E. Another disparity between both devices is the number of bolts used to secure the transmission to the engine.

What size are the pan bolts on a 4L60E?

700R4, 4L60E, 200-4R Pan Bolts.

8MM X 1.25MM, 13MM head

.

What engines bolt up to 4L60E?

The front face 4L60-E is natively compatible with either the

Chevrolet 90 degree “Small Block” & “Big Block” patterned engines

(image, left), including the V6, V8 & I6.

How many bellhousing bolts does a 4l80e have?

You will still have

5 bellhousing bolts

instead of 6, and this is the same thing as installing a TH400, TH350, or Powerglide behind these engines.

How much HP can a 4L60E handle?

Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support

over 1,000 ponies

.

How many bellhousing bolts are on a LS?

Can you use a 4L60E without a computer?

Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a

4L60E, running it off a computer is mandatory

. … Never mind TCC lockup; without a computer, the trans won’t shift at all.

What does 4L60E stand for?

The 4L60E Transmission is a series of automatic transmission from General Motors. Previously named the THM700, and later renamed to 4L60 to fit into GM’s new naming convention. The “E” stands for the

electronically shift controlled version of the 4L60 automatic transmission

.

What year did GM stop using 4L60E transmission?

The TH700R4 was renamed “4L60” (RPO MD8) following the new General Motors naming convention when the electronic version, 4L60E (RPO M30), was phased in as the 4L60 was being phased out. This happened in

1993 for trucks, vans, and SUVs

, and 1994 for rear wheel drive passenger cars.

How many spline is a 4L60E?

The 4L60E is an electronically controlled version of the 4L60 that retains the

27-spline

output shaft and has a 30-percent overdrive.

What does a shift kit do for a 4L60E?

In short, an automatic transmission shift kit

modifies the transmission’s shift timing in order to dramatically increase shift firmness and durability of the transmission components

.

Will a 350 bolt up to a 4L60E?

The

4L60E will bolt straight up to your 350

. :yes: You will need some way to control the tranny though. The OD is electronically controlled, hence the “E” at the end of the 4L60.

Can I replace my 4L60E with a 4L80E?

The 4L80E has been used in a number of 1/2-, 3/4-, and 1-ton GM trucks over the years. Upgrading from the 4L60E to the 4L80E is akin to going from a Dana 44 axle to a Dana 60–you’ll add some weight, but also add durability.

Is the 4L60E a good transmission?

In short, the 4L60E is

an excellent transmission

that continues to be improved. It’s one of the most popular automatic transmissions in America, and there are still millions of them in use. Gearstar builds high performance transmissions that are handbuilt in our shop.

What size are transmission pan bolts?

Automatic Transmission Oil Pan Bolt by Genuine®. Size:

6 mm x 28.5 mm

.

What are the torque specs for transmission pan?

Remove the Leaking Transmission Pan. …
Clean the Gasket Surfaces. …
Straighten the Pan and Bolt Holes. …
Glue on a New Gasket and Install the Pan.

How many pan bolts does a 700r4 have?

The THM700-R4 has

16 bolts

attaching the pan to the transmission.

What vehicles have a 4L60E transmission?

Buick Rainier 2004-2007.
Buick Roadmaster 1994–1996.
Cadillac Escalade 1999-2000, 2002-2005 (models with LM7/5.3L V8 Also with 6.0 LQ9)
Cadillac Fleetwood 1994–1996.
Chevrolet Astro 1993-2005.
Chevrolet Avalanche 2002-2008.
Chevrolet S-10 Blazer 1994-2005.
Chevrolet Camaro 1994–2002.

Can I rebuild my own 4L60E?

Unless you are a seasoned transmission builder with a lot of experience with the 4L60E series transmissions, it

is suggested you never execute transmission rebuilding yourself

. … We’re unable to show you a step-by-step 4L60E build here because there simply isn’t the space to do so.

Will a 6.2 bolt up to a 4L60E?

Yeah,

it will bolt up fine

, but you won’t be able to make it shift. The 4L60E was electronically controlled and if you don’t have the controller it won’t work.

Is there any difference between a v6 and v8 4L60E?

The 4L60E in the NNBS is identical except the harness in 2009-2013.

2007.5-2008 are the exact same regardless if is v6 or v8

. The converter or flexplate may be different tho.

Are shift kits good for your transmission?

Why do they make the transmission shift harder? Shift kits simply eliminate many of the restrictive oil flow problems in the transmission’s valve body. The results are

firmer shifts

and reduced slippage and shift overlap.

How do I know what tranny I have?

Open the driver’s side door and find the

white card on

the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

Will a 5.3 Vortec bolt up to a 4L60E?

Any vortec will bolt on

4.8, 5.3

, 6.0, 8.1. You’ll need a tune if you get anything besides a 4.8.

Can you make a 4L80E full manual?

The only logical transmission for our 4×4 was the 4L80E four-speed automatic transmission commonly found in 3/4- and 1-ton GM trucks and SUVs. … However, the

4L80E can be easily converted to a manually shifted valvebody

, which eliminates the need for the computer and much of the electronics and wiring.

How often should you change transmission fluid 4l60e?

For optimum protection, change the Transmission Fluid and filter

every 30,000 miles

(unless you have a new vehicle that is filled with Dexron III ATF, which is supposed to be good for 100,000 miles).

Can I change transmission fluid without dropping the pan?

Performing a transmission fluid change requires a little more precision than changing motor oil. But, if you know how to remove a drain plug, then you should

be able to change transmission fluid without removing the pan

. However, understand that this method will only allow you to change about 25 percent of the fluid.

Does a 4l60e torque converter have a drain plug?

No

, if you want a complete fluid change, its best to let the truck naturally flow out the old, take in the new…

How many bolts are in a Bellhousing?

8 bolts

: Pry bar in the drainage slot between the bellhousing and transmission can be used as a starting point. Block the rear of the engine up using some stacked 4x4s or 2x4s in the gap between the cradle and the rear “wall” of the pan (blocking between the ground and the engine).

Will a Turbo 400 bolt to an LS engine?

“The TH350, TH400, and

Powerglide are a direct bolt-on

for an LS engine,” explains TCI’s Winstead.

How many Bell bolts are in a 6l80?

Should be

8 bolts total

. Lower the back of the trans down some and you will see it. there’s 9 bolt hole total in the bell housing but the top left bolt is not used.