SIZE GALLONS OF WATER | 27′ Round 17,204 | 28′ Round 18,502 | 30′ Round 21,240 | 33′ Round 25,700 |
---|
How many gallons is a 27 ft round above ground pool?
Above Ground Swimming Pool Water Volumes by Size | 27 ft Round 15,054 gals 17,205 gals | 30 ft Round 18,585 gals 21,240 gals | 33 ft Round 22,488 gals 25,700 gals | 12×24 ft Oval 5,948 gals 6,797 gals |
---|
How many gallons of water are in a 27 foot round pool 4ft deep?
SIZE GALLONS OF WATER | 27′ Round 17,204 | 28′ Round 18,502 | 30′ Round 21,240 | 33′ Round 25,700 |
---|
How many gallons is a 27 foot by 54 inch pool?
Aboveground Pool Sizes 48 Inch Deep 54 Inch Deep | 21 Ft Round 9,105 gallons 11,700 gallons | 24 Ft Round 11,895 gallons 15,209 gallons | 27 Ft Round 15,050 gallons 19,350 gallons | 30 Ft Round 18,585 gallons 23,900 gallons |
---|
How many gallons is a circle pool?
SIZE GALLONS OF WATER | 12′ Round 3,823 | 15′ Round 5,973 | 18′ Round 8,602 | 21′ Round 11,708 |
---|
How many gallons is my round pool?
Length x width x depth x 7.5 = volume (in gallons)
Length times width
gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic meters. If you’d like to find the pool volume in gallons, multiply your results by 7.5, as there are 7.5 gallons for each cubic foot.
How many gallons is my pool 24 round?
Poolsize Round Capacity (Gallons) Capacity (Gallons) | 15 Round 5,000 3,500 | 18 Round 7,500 5,000 | 21 Round 10,000 6,500 | 24 Round 13,000 7,500 |
---|
What size is a 10000 gallon pool?
Pool Size US Gallons | 12 ft x24 ft Oval 6,400 | 15 ft x24 ft Oval 8,000 | 15 ft x 30 ft Oval 10,000 | 18 ft x 33 ft Oval 13,000 |
---|
How deep is the water in a 52 inch pool?
Wall Height
Many people wished they were deeper so the manufacturers started making 52 inch tall pools so that they would hold nearly
4 feet
of water at 3′ 10”. Now the most popular pools are 54” tall and they can actually hold 4′ of water.
How many gallons is a 18×36 pool?
Standard In-Ground Pool Volumes in Gallons by Size | 18×36 17,000 24,300 | 19×38 19,000 27,100 | 20×40 21,000 30,000 | 22×44 25,400 36,300 |
---|
How many gallons is my Intex 10×30 pool?
A 110-120 volt Krystal ClearTM cartridge filter pump is included and is very easy to install – just hook up the hoses and enjoy clean refreshing water. Pump flow rate:
330 gallons
, System flow rate: 300 gallons.
How long after you fill a pool Can you swim?
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait
about 24 hours
or until levels are approximately 5 ppm. If you’ll only be adding liquid chlorine, it’s generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
How do you calculate gallons in a round tank?
Divide the tank’s volume in cubic inches by 231
to convert to gallons. Press the “÷” button, then enter “231” and hit “=” a second time. Dividing by 231, which is the number of cubic inches in a gallon, will tell you exactly how many gallons your tank will hold when filled to capacity. It’s that easy!
Is it OK to fill a pool overnight?
If necessary, clean the pool so that you will have clean water right from the start. When you are ready to begin adding water, make sure you start with a low pressure source such as a garden hose. …
It is never recommended to leave your home during this time
or to fill your pool overnight.
What is the cheapest way to fill a pool with water?
- Your Water.
- Call the water company and tell them you are going to fill your swimming pool. …
- Run the hose to the pool with enough slack that the end of the hose is on the bottom of the pool.
How many Litres is a 27 foot round pool?
Pool Shape Pool Diameter in Feet 8 Ft Avg. Depth | Round 18 57,600 | Round 21 78,400 | Round 24 102,400 | Round 27 156,422 |
---|
How do you calculate the volume of a round pool?
How to Compute Volume of a round or circular pool. To get the volume, you need to
get the radius squared, multiply it by 3.14 then multiply the result by the average depth, then multiply it by 28.31 to get the volume in litres
. Radius squared is basically half of the diameter of your pool, multiplied by itself.
How many gallons is average pool?
A 12-by-24-foot rectangular pool with an average depth of 5 feet will hold approximately
10,800 gallons
of water. A 16-by-32-foot pool with the same depth will hold about 19,200 gallons, and a 20-by-40-foot pool will hold 30,000 gallons.
How do you calculate the capacity of a pool?
If the maximum depth of the pool is 5 feet, it can accommodate: 1,300 ÷ 20 = 65 people. If the entire pool is more than 5 feet deep, the capacity increases to:
1,300 ÷ 15
= 86 people. If only half of the pool is more than 5 feet deep, the capacity is: (650 ÷ 20) + (650 ÷ 15) = 76 people.
How do you calculate the volume of a kidney shaped pool?
Kidney-shaped Pool
Add the distance across from the two widest points together. Then multiply by the length and 0.45. This will give you the area.
Multiply the area by the average depth and 7.5
to get the gallons of your pool.
How many gallons is a 24 ft by 52 inch pool?
Approximate Water Capacity –
13,500 Gallons
.
How many gallons is a 20 foot round pool?
Poolsize Round Capacity (Gallons) Poolsize Oval | 21 Round 10,000 12×24, 14×20 | 24 Round 14,000 14×25, 15×24 | 27 Round 18,000 15×30, 16×26 | 30 Round 21,000 16×32 |
---|
Is a 20×40 pool big?
Standard pool dimensions usually measure something like 10 x 20, 15 x 30, and 20 x 40, with an average depth around 5.5 feet. 10 x 20 is considered a small in-ground pool, while a 20 x 40-foot pool
is on the larger side of things
. … Therefore, it’s important to consider the shape of the pool that’ll best fit your needs.
What is an average inground pool size?
What is the average inground pool size? The average size of an inground pool depends on many different factors, such as pool shape. A rectangular pool typically measures anywhere from
10 by 20 feet to 20 by 40 feet
. Therapy pools tend to be smaller pools than pools with other uses, measuring about 7.5 by 17.5 feet.
How many gallons of water in a 21 foot round pool 52 inches deep?
A 21′ round pool will hold approximately
10,000 gallons
of water.
What’s the deepest above ground pool you can buy?
The deepest above-ground pool available is the
Intex 36-Foot by 16-Foot by 52-Inch Above-Ground Pool
. The four-foot depth may not seem like a lot, but in the world of above-ground pools, it’s tough to find deeper floors.
How many gallons is a 18 ft Intex pool?
Water capacity:
5,455 gallons
(80%) Approximate set-up size: 18ft X 48in.
How many gallons are in a 14ft by 42in pool?
Water capacity is
3,357 gallons
(90%) and it is ready for water in 45 minutes.
How do you calculate the capacity of a cylindrical tank?
V(tank) = πr
2
l
Calculate the filled volume of a horizontal cylinder tank by first finding the area, A, of a circular segment and multiplying it by the length, l. Area of the circular segment, the grey shaded area, is A = (1/2)r
2
(θ – sinθ) where θ = 2*arccos(m/r) and θ is in radians.
What is the largest above ground pool you can buy?
Once you have determined an area that is clear, you can figure out the largest size pool that will fit. Generally, above ground pools come in the following sizes:
12′, 15′, 18′, 21′, 24′, 27′, 30′ & 33′
. There are also a variety of oval sizes if your area will not allow for a round pool.
How deep are backyard pools?
The shallow end of a classic backyard pool is 3.5 deep and transits to a
deep end of 5 feet or deeper
. You can alternatively get a pool with shallow both ends and deeper middle.
How much water is in a 18 foot round pool 48 inches deep?
Diameter Height Gallons | 15′ 48′′ 3750 | 18′ 42′′ 4800 | 18′ 48′′ 5500 | 18′ 52′′ 6000 |
---|
What is the volume of the cylindrical tank?
The formula for the volume of a cylinder is V=Bh or
V=πr2h
. The radius of the cylinder is 8 cm and the height is 15 cm. Substitute 8 for r and 15 for h in the formula V=πr2h .
How much chlorine do I put in a 10×30 pool?
Pool Size (Diameter x Depth) Capacity (Gallons) Chlorine Bleach (Oz / Cups) | 8′ x 30′′ 639 8.5oz / 1.25C | 10′ x 30 ′′ 1,081 14oz / 1.75C | 12′ x 30′′ 1,485 19.5oz / 2.5C | 12′ x 36′′ 1,779 23oz / 3C |
---|
How much shock Do I put in a 10×30 pool?
The general recommendation is to use
1 pound of cal hypo shock for every 10,000 gallons of pool water
, and 10 ounces of sodium hypo with around 12.5% chlorine to sanitize your pool. Make sure the pool water is at its normal level. Make sure your pool’s pH is between 7.2–7.6 and its alkalinity is between 80–120 ppm.
How many gallons of water does a 10ft pool hold?
Item 10ft Fast Set Pool | Weight 8.6kg (19.0lb) | Water Capacity 3,638L ( 608 gal ) | Size 10ft x 30′′ | Included 330 gallon filter pump (may only be included in some retailer packages) |
---|
Should you shock a pool when you first fill it?
At first you’
ll add chlorine
in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. … Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
Why is my pool green when I just filled it?
Your first instinct when you fill your pool with new water, is
to shock it
. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.
What do you put in a pool when you first fill it up?
- Stain & Scale Preventer.
- Granular Shock Chlorine.
- Chlorine Tablets.
- pH Increaser and/or pH Decreaser.
- Alkalinity and/or Calcium Increaser.
- Cyanuric Acid (Stabilizer)
- Algaecide and Clarifiers if needed.
- Complete Test Kit or Test Strips.