The only 8 foot pool currently available from Intex, model number 56971EG, is the newer 2.4 m x 76 cm (8 foot x 30 inch) version. When filled correctly, this pool is 58 cm (23 inches) deep and will hold 2,420 litres (639 gallons) of water.
How many Litres is an 8ft Intex pool?
The Intex 8ft Easy Set swimming pool has room for the whole family, holding up to 1,942 litres of water.
How many chlorine tablets do I need for a 8ft pool?
Answer: I would say yes, I use 3 tablets for an 8ft pool which is roughly 1700 litres, you could use less for a smaller pool but most importantly you can control the amount of chlorine dispensed by rotating the bottom, I’ve had my pool up since June and I’ve not had to change the water once.
How many Litres of water are in a 10ft Intex pool?
Pool water capacity at 80% full: 848 gallons ( 3,853 litres ). Size: Diameter 10 feet (305cm), Height 30 inches (76cm).
How many people fit in an 8ft pool?
Height: 30 inches. Diameter: 8 feet. Capacity: 4 to 6 people . Water capacity: 639 gallons.
How many gallons of water are in a 8ft pool?
| Item 8ft Fast Set Pool | Weight 6.2kg (16.3lb) | Water Capacity 2,300L ( 608 gal ) | Size 8ft x 26′′ |
|---|
How many gallons is a 8ft pool?
The only 8-foot pool currently available from Intex, model number 56971EG, is the newer 8-foot-by-30-inch. When filled correctly, this pool is 23 inches deep and will hold 639 gallons of water.
How many chlorine tablets do I need for a 12ft pool?
12ft pool – 3 tablets with 2 slots open at base for inflatable ring type pools and 3 slots open for framed pools.
How long after putting chlorine in pool Can you swim?
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
How long do chlorine tablets take to work?
Typically, a 3-inch pool chlorine tablet is designed to chlorinate from 7,500 to 10,000 gallons of water per week, meaning it’ll take seven days to dissolve.
How long does it take to fill a 10ft by 30 inch pool?
For the smallest Intex Easy Set, that’s 10 feet in diameter and has a depth of 30 inches, it will take about 1.5 hours for it to be filled up to 80% of its capacity using a hose with a 12 GPM flow rate.
How long will it take to fill a 1000 gallon pool?
The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.
How long does it take to fill a 10ft Intex pool?
Takes a while to fill between 3 and 4 hours .
How long does it take to fill up a 8 foot pool?
All in all It took about 30-40 min to completely fill the pool to the top rim. While filling you will need to get those hoses in place as the water rises to the area the hose ports are it will start to drain out the hoses unless the hoses are attached with the clamps provided to the pump etc.
How much shock do I need for a 1000 gallon pool?
A 1000 gallon pool may just need 0.13 ounces or a little higher . Instead of using Clorox, I recommend regular liquid chlorine bleach or Sodium Hypochlorite for daily shocking, Clorox has lots of Calcium Hypochlorite and is good only for killing algae.
