The Honda Fit requires 3.3 to 3.8 quarts of oil with the filter changed, depending on year and engine configuration.
How much oil does a 2013 Honda Fit take?
A 2013 Honda Fit takes 3.8 quarts (3.6 liters) with filter.
Stick with SAE 0W-20 full synthetic for the best performance and fuel economy. After pouring in the specified amount, always check the dipstick and top off as needed. The drain plug should be torqued to 30 ft-lbs; grab a new crush washer (Honda part # 94109-14000) each time to keep leaks at bay.
How many quarts of oil does a 2008 Honda Fit take?
A 2008 Honda Fit takes 3.8 quarts (3.6 liters) with filter and 5W-20 oil.
This generation runs the K24 engine. After you’ve drained and refilled, run the engine for two minutes, then shut it off and check the oil level on a level surface. The drain plug washer is Honda part # 94109-14000; torquing to 29 ft-lbs keeps you from over-tightening on that aluminum oil pan.
How much oil does a 2017 Honda Fit take?
A 2017 Honda Fit takes 3.5 quarts (3.3 liters) with filter and 0W-20 oil.
Here’s the L15B7 engine with a revised oil filter housing. Pick up Honda filter part # 15400-RTA-A01. Once you’ve filled it up, start the engine, let it idle for 30 seconds, and check for leaks around the filter and drain plug before you verify the oil level on the dipstick.
How many quarts of oil does a 2009 Honda Fit take?
A 2009 Honda Fit takes 3.8 quarts (3.6 liters) with filter.
Same as the 2008, this model uses 5W-20 oil. Always use a torque wrench on the drain plug—stripping the aluminum oil pan isn’t fun. Keep a new crush washer (Honda # 94109-14000) in your toolbox; it’s way cheaper than an oil pan repair.
How much oil does a 2010 Honda Fit take?
A 2010 Honda Fit takes 3.8 quarts (3.6 liters) with filter.
Use Honda-recommended 5W-20 oil. If you’re tackling this yourself, let the oil drain for 10–15 minutes to get a complete change. The oil filter for this year is Honda part # 15400-RTA-A01, same as the 2009.
How much oil does my 2007 Honda Fit take?
A 2007 Honda Fit takes 3.8 quarts (3.6 liters) with filter.
This is the GE chassis with the K24 engine. Use 5W-20 oil and Honda oil filter # 15400-RTA-A01. After refilling, run the engine for 30 seconds to pressurize the system, then recheck the oil level and top off if necessary.
How many quarts of oil does a 2015 Honda Fit take?
A 2015 Honda Fit takes 3.5 quarts (3.3 liters) with filter and 0W-20 oil.
This is the second-generation Fit (GD3) with the L15B7 engine. Use Honda oil filter part # 15400-RTA-A01. Always warm the engine for two minutes before draining to help the oil flow and carry contaminants out.
How much oil does a Honda Fit 2016 take?
A 2016 Honda Fit takes 3.5 quarts (3.3 liters) with filter and 0W-20 oil.
Same engine as 2015 (L15B7). Use Honda filter # 15400-RTA-A01. After changing oil, reset the maintenance minder using the trip/reset button on the instrument cluster.
Does a Honda Fit need synthetic oil?
Yes, Honda recommends full synthetic 0W-20 oil for optimal performance and fuel economy in all Fits from 2015 onward.
Older Fits (2007–2014) can run conventional 5W-20, but switching to synthetic improves cold starts and long-term engine protection. Follow Honda’s schedule: 3,000–5,000 miles for conventional oil, 7,500–10,000 miles for synthetic. Always use oil that meets Honda’s specs: API SN, ILSAC GF-5, or newer.
Can 5w30 be used instead of 0w20?
You can use 5W-30 temporarily in a pinch, but it’s not ideal for modern Fits.
Honda specifies 0W-20 for fuel economy and cold-weather performance. Using 5W-30 slightly reduces fuel efficiency and may not provide the same wear protection. If you must use 5W-30, switch back to 0W-20 at the next oil change. Always check your owner’s manual before deviating from the recommended viscosity.
What kind of oil does Honda Fit use?
Honda Fit uses SAE 0W-20 full synthetic oil from 2015 onward and 5W-20 conventional or synthetic from 2007 to 2014.
Popular choices include Mobil 1 0W-20 and Honda’s own Genuine Motor Oil. Always use oil that meets or exceeds API SN and ILSAC GF-5 specifications. Check the oil fill cap or owner’s manual for confirmation. Using the wrong oil can trigger the maintenance minder and reduce fuel economy.
What type of oil does a 2010 Honda Fit take?
A 2010 Honda Fit takes 5W-20 oil.
Use either conventional or synthetic 5W-20 that meets API SN and ILSAC GF-5 standards. Popular choices include Mobil 1 Extended Performance 5W-20 and Pennzoil Platinum 5W-20. Avoid using higher-viscosity oils like 10W-30 unless explicitly allowed in an emergency.
How much oil does a 2014 Honda Fit take?
A 2014 Honda Fit takes 3.8 quarts (3.6 liters) with filter and 5W-20 oil.
This is the final year of the first-generation Fit (GD2). Use Honda oil filter part # 15400-RTA-A01. After draining, let the oil fully drain for 10–15 minutes to prevent overfilling.
How much oil does a 2018 Honda Fit take?
A 2018 Honda Fit takes 3.5 quarts (3.3 liters) with filter and 0W-20 oil.
This is the first year of the third-generation Fit (GR) in some markets. Use Honda oil filter part # 15400-RTA-A01. Always use a torque wrench on the drain plug (30 ft-lbs) to avoid stripping the oil pan.
How much oil does a 2012 Honda Fit hold?
A 2012 Honda Fit holds 3.8 quarts (3.6 liters) with filter.
This is the second year of the first-generation Fit (GD2) with the L15A7 engine. Use 5W-20 oil and Honda oil filter part # 15400-RTA-A01. After refilling, start the engine, let it idle for 30 seconds, then recheck the oil level and top off if needed.
