Bleach should not be put into the well straight from the bottle. The general recommendation is to dilute the
laundry bleach 1:100
, (one gallon of bleach to 100 gallons or water; half a gallon of bleach to 50 gallons of water; a quart of bleach to 25 gallons of water.)
How much Clorox is needed to disinfect a well?
Mix
2 quarts bleach in 10 gallons of water
; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Don't forget outdoor faucets and hydrants.
Can I use bleach to disinfect my well?
Mix 2 quarts bleach in 10 gallons of water
; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. … Pour it into the well without pumping.
How long should you wait to use water after you chlorinate a well?
At least 24-hours
after the chlorination process run your garden hose outside but in a safe area. If your well is a low production well, then keep the water running for an hour or two. As long the water keeps flowing, it will not damage your pump.
How much bleach do I use to shock my well?
CALCULATE AND POUR:
Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints
into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.
How often should you sanitize your well?
Homeowners with private wells should have their well water tested
every 3 to 5 years
for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How long do you run water after bleaching well?
Run the water out of the hose for
about 10 minutes
in an area away from the well, septic system, landscaping, and bodies of water. The water may be discolored. Continue monitoring and running the water until it runs clear.
How long does it take to flush bleach out of a well?
Run the water to flush the bleach solution out of the well. Monitor the process, it can take
30 minutes to 24 hours or more
to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution.
How long after bleaching well can I shower?
Keep in mind that doing laundry and taking a shower cannot be done for
at least 24 hours
with a chlorinated well. Waiting a few days to do these is a good idea. We recommend using unscented bleach for this process and using a chlorine test kit from your local supply store.
How much bleach is needed to disinfect a gallon of water?
1 tablespoon of bleach per 1 gallon of water
will give you a 50-200 ppm sanitizing solution. This can be used to sanitize dishes, utensils, food preparation counters and tables. This will give you a 500-800 ppm disinfecting solution.
What happens if you put too much bleach in laundry?
Bleach can fight stains and whiten your whites, but there is such a thing as too much bleach when it comes to doing your laundry. When you over-bleach your laundry,
it can impact the strength and quality of the fibers over time
. … Read the care label as some fabrics cannot be bleached.
How much does shocking a well cost?
To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from
$80 – $200.
How fast does well water replenish?
The well's size, the type of geology the well is in, and the condition of the well all factor into the recovery rate of a water well. Recovery rates can vary from
a fraction of a gallon per minute to more than ten gallons per minute
.
Does a well need maintenance?
Regular maintenance of your well
is required to ensure the continued safety of your water and to monitor for the presence of any contaminants. … All hazardous materials, such as paint, fertilizer, pesticides, and motor oil, should be kept far away from your well.
Can I put vinegar in my well?
Disinfect your well when: The well is new. … Liquid chlorine in the form of household bleach and
food grade white vinegar
can be used to disinfect your well. When chlorine is added to water the pH level will rise. Food grade white vinegar is used to lower the water's pH level so the chlorine will work effectively.
