One million pounds of water is approximately 120,000 gallons. Converting to ounces, (1 pound = 16 ounces)
1 ounce of chlorine in 7,500 gallons
equals 1 ppm.
How much liquid chlorine does it take to raise 1 ppm?
Generally, you should maintain the pool’s chlorine level between 1 and 3 ppm. Thus, if the chlorine level is already 1 ppm and you want it higher,
add 0.00013 ounces per gallon
to raise the chlorine by 1 ppm.
How much shock does it take to raise 1 ppm?
It takes 1 ounce of chlorine in 7,500 gallons of water to equal 1 ppm. We will divide 30,000 gallons by 7,500 to get 4. It requires
4 ounces
of chlorine to raise the parts per million of this example pool by 1.
How much bleach does it take to raise 1 ppm?
To raise the free chlorine by 1 ppm, I add
about 40 ounces of an 8.3 percent bleach solution
, which is about a third of a jug of bleach. You can scale up and down accordingly; if you need to raise the free chlorine by 2 ppm you would add about 80 ounces.
What is the ppm of liquid chlorine?
If not, here is how to calculate the amount of chlorine needed. It takes 1 ounce of chlorine in 7,500 gallons of water to equal
1 ppm
.
Can I add shock and chlorine at the same time?
Adding chlorine besides the shock can increase the chlorine content in the water which can make the entire shocking process useless. Hence,
it is better if you don’t use the shock and chlorine at the same time
. … The chlorine level will fall below 5 parts per million.
Does shock raise pH?
When you shock a pool, you test and adjust the pH level for a reason
. With that said, if you shock a pool outside of the 7.2 to 7.4 pH range, not only will you waste a significant amount of the chlorine used, you will also end up with cloudy water.
How do I make my pool water crystal clear?
- Keep the chemical levels within the ideal ranges.
- Check the flow meter to be sure the pool is circulating water at a proper flow rate.
- Brush the walls and floor weekly.
- Keep a preventative amount of algaecide in the pool.
How do you make a 1% chlorine solution?
How to prepare 1 percent sodium hypochlorite solution? To prepare
1:10 bleach solution add one volume of household bleach (e.g. 1 litre) to nine volumes of clean water (e.g. 9 litres)
. To prepare 1:100 bleach solution add one volume of 1:10 bleach solution (e.g. 1 litre) to nine volumes of clean water (e.g. 9 litres).
Can I use bleach instead of chlorine?
Short answer:
yes
. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you’ll need to use less bleach to treat your pool.
How much chlorine do I need for a 10000 Litre pool?
The most important factor though is the size of the pool. You’ll need about
52-104 oz of liquid chlorine per 10,000 gallons of water
. This amount should get the chlorine level to between 5 and 10 ppm.
How much liquid chlorine do I need to shock my pool calculator?
A simple ratio and a standard rule of thumb to follow when you shock your pool is to
dissolve one pound of either calcium hypochlorite or sodium dichlor for every 10,000 gallons of pool water
.
Is liquid chlorine better than granules?
Liquid chlorine may be a good choice if you have a large pool, but the costs associated with it, and the available chlorine per pound could mean that
chlorine granules are
the better option. In the end, both liquid chlorine and chlorine granules will do their job and keep your pool clean and clear.
Is shock and chlorine the same thing?
1) What is the difference between chlorine and shock? …
Shock is chlorine
, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
How long after shock do I add chlorine?
You should
wait one hour per pound of shock product added
, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool. As a reminder, you want your pH to be between 7.2 and 7.8ppm and your free available chlorine to be 1-4ppm for safe swimming.
Do I add chlorine or stabilizer first?
If you
add the stabilizer first
, then the chlorine shock you add will not break down quite as quickly in sunlight, but will also be less effective.
