CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.
How do I add chlorine to my well water?
Mix 2 quarts bleach in 10 gallons of water ; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Don’t forget outdoor faucets and hydrants.
How do I know how much chlorine to put in my well water?
- CLEAN: Remove all loose or foreign debris from the well house, spring house or storage tank. ...
- CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above.
Can you put too much chlorine in a well?
Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well. [By reducing the concentration there is less chance of corrosion of the cables and pipes in the well.
How often should well water be chlorinated?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How much bleach do I use for 1 cup of water?
This is equivalent to: • 1 cup of bleach per gallon of water, or • 1⁄4 cup of bleach per 32 ounces of water .
How much bleach do you add to water?
1/3 cup bleach per 1 gallon of water OR 2 tablespoons bleach per 1 quart water. This will give you a 1000+ ppm disinfecting solution. After cleaning the area with detergent, spray or wipe with surfaces with the disinfectant.
How long does it take to flush chlorine from well?
Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution.
Can I put a chlorine tablet in my well?
Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well . Don’t use stabilized swimming pool chlorine products or non-chlorinated “pool shock” products, as they are not effective enough to clean your drinking water.
Can I put Clorox bleach in my well?
You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.
How much does it cost to have a well chlorinated?
To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200 . You can also perform the task yourself.
How fast does well water replenish?
The well’s size, the type of geology the well is in, and the condition of the well all factor into the recovery rate of a water well. Recovery rates can vary from a fraction of a gallon per minute to more than ten gallons per minute .
Does a well need maintenance?
Regular maintenance of your well is required to ensure the continued safety of your water and to monitor for the presence of any contaminants. ... All hazardous materials, such as paint, fertilizer, pesticides, and motor oil, should be kept far away from your well.
How much bleach do I put in 2 cups of water?
- 1 ml (1/4 teaspoon) household bleach to 500 ml (2 cups) water, or.
- 20 ml (4 teaspoons) household bleach to 10 L (40 cups or approx. 2 gallons)
How much bleach do I put in 16 oz of water?
Bleach to Water Mixing Instructions: Mix bleach with cool water to make solution using the chart the below as a guide. 1 Gallon (128 ounces) 1 to 2 Teaspoons 8 Tablespoons or 1/2 cup (4 oz.) 1 Quart (32 ounces) 14 to 12 Teaspoon 2 Tablespoons (1 oz.) 1 Pint (16 ounces) 18 to 14 Teaspoon 1 Tablespoon (.
What bacteria can survive bleach?
Bleach is a strong and effective disinfectant – its active ingredient sodium hypochlorite is effective in killing bacteria , fungi and viruses, including influenza virus – but it is easily inactivated by organic material.
