In fish ponds,
do not mix in more than . 4 ppm
of copper sulfate, or your fish may become ill or possibly die. This would be the equivalent of a quarter liquid ounce of the product per 275 gallons of water. Again, no more than one half of the lake or pond should be treated at a time.
How much copper sulfate do you put in a pond?
Generally, copper sulfate crystals should be used at
5 pounds per acre of pond
. So, for instance, if you have a 1-acre pond, you should dissolve 5 pounds of crystals in three gallons of hot water first. For best results, treat your pond using the spraying method to kill the actively growing algae at the top and bottom.
Can you use too much copper sulfate?
Copper sulfate can cause severe eye irritation.
Eating large amounts of copper sulfate can lead to nausea, vomiting, and damage to body tissues, blood cells, the liver, and kidneys
. With extreme exposures, shock and death can occur.
Is copper harmful to pond fish?
In a pond with algae,
copper treatments can cause oxygen concentrations to drop, which may result in fish kills
. Pond algae is a major source of oxygen production and by removing it this source of oxygen is also removed.
How often can you treat a pond with copper sulfate?
You would mix 5 pounds of granular copper sulfate with 3 gallons of hot water, then spray it over half of your pond, wait a few days, and spray the other half.
Never treat the entire lake or pond at once
, as doing so will deplete oxygen levels while vegetation and algae decomposes after dying.
How long does it take for copper sulfate to work?
Treating only one third of an area at over
48-72 hours
will help avoid crashing your oxygen levels. Have you ever wondered what gets rid of algae in your pond or lake? There are a few things, but Copper Sulfate is the most used, and the most economical algae control available.
How do I add copper sulfate to my pond?
What does copper sulfate do to a pond?
Copper sulfate results in
copper build up in pond sediments and creates a sterile bottom in the pond
. Besides many important organisms, it kills beneficial bacteria. Beneficial bacteria such as our all natural, PlanktoniX products, breaks down organic matter in the pond including silt, sludge, decaying plants, etc.
How often should I use copper sulfate?
Application by Slug Method: Make a dump of Copper Sulfate into the irrigation ditch or lateral at 1⁄4 to 2 pounds per second of water per treatment. Repeat about
every 2 weeks as needed
. A dump is usually necessary every 5 to 30 miles depending on water hardness, alkalinity, and algae concentration.
What happens when you put copper sulfate in water?
If copper sulphate crystals are added to water then,
the particles of copper sulphate crystals loses attraction between them and starts moving continuously and gets mixed up with water
. It is called ‘hydrated copper sulphate solution which is having a blue colour.
Does copper sulphate dissolve in water?
Water
Is copper sulfate in ponds safe for dogs?
The algae the copper sulfate treats is far more dangerous to your dogs than copper sulfate
. Dogs develop algae poisoning when they drink form contaminated water sources.
Will copper sulfate hurt fish?
Copper sulfate, a pesticide used to respond to a wide variety of pests,
can be unsafe to fish in ponds or other bodies of water
. It is unwise to apply copper sulfate to fish populations where water is soft or where young fish are present.
Is copper good for fish?
Copper can be toxic to some sensitive fish species
and is highly toxic to many invertebrate species. Even for more tolerant species, chronic copper use can damage gills, kidneys, spleens, and other organs and systems.
How do you neutralize copper sulfate?
Neutralize the acid very carefully with
bicarbonate of soda to a neutral point
. The steel wool will have reacted with most of the acid. Flush the remaining liquid down the drain with a good bit of water and throw your cathode,anode and rinsed steel wool in a metal recycle trash bin.
How long will copper sulfate last?
Chelated copper algaecides reduce the frequency of treatments because they are effective for
up to 6 weeks
after application. With all chemical treatments, we recommend using only as needed.
Is Cutrine plus the same as copper sulfate?
Since then and over the last 30 years or so, a chelated (chemically locked in) copper compound was formulated called Cutrine-Plus(available in liquid or granular).
The product is far superior to copper sulfate
in that it provides a longer contact (killing) time due to its stability to work in alkaline waters.
Can you buy copper sulfate?
I found copper sulfate at
Home Depot
as Zep Root Killer, which is labeled as copper sulfate pentahydrate and is sold with septic tank and drain cleaning chemicals (not with other garden root killers or with other plumbing chemicals). This product contains solid granules of copper sulfate. It’s very easy to work with.
What is the ratio of copper sulfate to water?
For example, if heating some hydrated copper (II) sulfate gave off 0.060 moles of water, and left behind 0.012 moles of anhydrous copper (II) sulfate (CuSO4), then the ratio is
5:1
, and the formula would be written as CuSO4•5H2O.
How do I get rid of algae in my pond without harming fish?
- Remove Algae. Rake out as much algae as possible with a pond or garden rake, taking care not to damage the pond liner by accidentally tearing it.
- Remove Debris. Remove fallen leaves and dead plant foliage from the pond. …
- Free Floating Aquatic Plants. …
- Use Barley Straw. …
- Utilize Beneficial Bacteria Tablets.
How long does it take copper sulfate to dissolve roots?
It can take as little as two or three days to clear out the line. However, if your system has a slower flow of water, it can take a bit longer (up to a week) to get rid of the roots. By contrast, copper sulfate takes
up to four weeks
to even start the process of root decay.
How long after copper sulfate can I swim?
Wait
at least 14 days
between treatments. Begin treatment along the shore and proceed outwards in bands to allow fish to move into untreated areas.
Is copper sulfate a fertilizer?
Copper Sulfate is often used as a fertilizer
, increasing the copper content of the soil. This can help to rectify peaty and acidic soils in order to create a hospitable climate for plant growth.
What is the cost of copper sulfate?
| Copper Sulphate Price | September ’21 ₹200/Kg | June ’21 ₹195/Kg |
|---|
What can I do with copper sulfate?
Copper sulfate is used as a drying agent in the anhydrous form, as an additive for fertilizers and foods, and several industrial applications such as textiles, leather, wood, batteries, ink, petroleum, paint, and metal, among others. It is used also as an animal nutritional supplement.
Is Cutrine plus safe for fish?
Cutrine Plus is a 9% chelated form of copper that is
completely safe for fish
, plants, and people! It does not build-up in the pond and does not damage your ponds ecosystem.
Is copper sulfate bad for the environment?
It can make water runoff hazardous
. Copper sulfate is known to build up once used, and can cause runoff water to become potentially hazardous to those who encounter it. Water that has been contaminated with copper sulfate can be harmful to crops, animals, and people.
