Replacing balusters (also called spindles) typically costs anywhere from
$1,200 to $1,600
. Putting in a handrail will likely cost anywhere from $700 to $2,500.
How much does spindle cost?
How Much Does a Spindle Cost? Spindles can cost anywhere
between $75 and $400
. The price largely depends on whether you’re going to get an individual spindle or a pair. The spindle’s price also varies because of the complexity of the design, which will depend on the vehicle’s make and model.
Can you replace stair spindles?
There are really just three steps involved in replacing a broken spindle: remove the old one,
find a replacement
, and fit it in. These tips will help the process go smoothly.
Is it easy to replace staircase spindles?
Are you looking for a simple project with big impact? Replacing wood stair balusters with
metal balusters
is the project for you. It’s pretty simple, requires minimal tools, and makes a bigger difference than you’d expect.
How many staircase spindles do I need?
There are a couple of different sizes of spindle but as a general rule
approximately two spindles are needed for every stair tread
to meet the regulations and also to look in proportion.
How long does it take to replace a spindle?
A quick turnaround for an emergency spindle repair job would be 24 hours, but the standard turnaround time for a straight repair is
between 5-10 business days
. In some unique cases, depending upon the need to make repairs or obtain new parts, a spindle repair job can take a few weeks.
What is the difference between balusters and spindles?
A baluster and spindle is actually
almost the same thing
, but the word spindle is more commonly used because it is easier to remember and say. Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts.
Can you glue stair spindles?
Simply apply
PVA glue
into the split, squeeze the wood together, and then wipe over the surface with a damp rag. Then to help the glue set, bind your spindle together with waxed string or self-adhesive tape. Once dry, remove the string/tape and voila your spindle will be as good as new!
How do you remove Bannister spindles?
Use a chisel and a mallet
to remove the piece of fill, a strip of wood that plugs the groove between the banister and the spindles, also known as balusters, holding the spindles to the banister. Place the point of the chisel in the center of the fill and hit the other end of the tool carefully with the mallet.
How do you refurbish a staircase?
- 2 – Replace your handrail. Replacing stair parts is an effective way of transforming your home without major disruption and expense. …
- 3 – Replace worn treads and risers with oak stair clad. …
- 4 – Get your paintbrush out. …
- 5 – Use carpet. …
- 6 – Stair Balustrade Kits. …
- 7 – Paint your stairs.
How far apart should staircase spindles be?
The building regulations state that a 100mm sphere cannot pass through any opening and this includes between spindles. So your maximum space between spindles is
99mm
.
How do I calculate how many spindles I need?
To determine the correct number of spindles for the guard,
measure the length of the railing
. Then, count the number of vertical guards and the measure the thickness of each. Next, multiply the number of spindles by the thickness, and then subtract this number from the length of the railing.
How do I figure out how many spindles I need?
To calculate the number of stair spindles required, count the number of treads (steps) on the single flight, making sure not include the landing area,
multiply by two, and then subtract two
(as you will only require one spindle on the top and bottom steps to make room for the newel posts).
