How Much Does It Cost To Demolish A Pool?

by | Last updated on January 24, 2024

, , , ,

The average price to remove a swimming pool falls

between $3,000 and $10,000

. The cost to eliminate an above ground model averages $2,700. An inground unit can be extracted for $9,000 to $19,000 or filled in for about $5,000.

How long does it take to dig a hole for a pool?

An experienced excavation contractor with the proper equipment should be able to dig the hole for a typical pool in

about 10 hours

. Digging a hole for a larger than average pool or a pool in a location with rocky soil may be a two-day job. Excavation in locations where access is limited may take longer, as well.

How long does it take to demolish a pool?

On average, you can expect the pool removal process to take

2 – 5 days from start to

finish. In the case of a complete pool removal, the removal and fill process will only take about 3 days; but city inspections can delay this by a couple of days.

What does it cost to remove an inground pool?

The average cost to completely remove an inground pool ranges from

$9,000 to $19,000

. While the average cost to fill in a pool (partial removal) is around $5,000.

Can you remove a pool yourself?

Unless you’re removing an above ground pool,

DIY pool removal isn’t recommended

. If you have an above ground pool, removing it simply involves draining the pool, tearing down the pool, and hauling it away to be disposed of properly.

Can you just fill a pool with dirt?

There are several factors that can go into the cost of filling in a pool with dirt. This can include the size of the pool, location, fill material used and more. On average, an individual can expect to pay a professional contractor anywhere

between $2,000 to $8,000

to fill a pool with dirt.

What can you do with an inground pool you don’t want?

If you don’t go the Deckover route, following are a few other options during the time when your swimming pool is empty and/or you no longer want to use your pool for swimming:

Turn your pool into a skateboard park

. Watch kids play games inside an empty swimming pool. Host a party inside your empty pool.

Is it cheaper to dig your own pool?

After some discussion on pool size and shape, I can always say that, as a rule of thumb

you will typically save half of what it would cost to have the pool installed by a local pool contractor

.

Do pools add value to a home?

A Swimart survey found 90 per cent of pool owners believed their pool boosted the value of their house by an average of $30,000; with estimates ranging

between $10,000 and $100,000

, depending on size, style and location. …

What are the stages of building a pool?

  • Step 1: Layout & Design. …
  • Step 2: The Dig. …
  • Step 3: Steel Installation. …
  • Step 4: Plumbing & Electrical. …
  • Step 5: Shotcrete. …
  • Step 6: Tile and Decking. …
  • Step 7: Interior Finish. …
  • Step 8: Pool Start-Up.

Does removing a pool decrease home value?

Unless your geographic location allows for 6 or more solid months of swimming weather, your pool is less than 15 years old, and most of the neighborhood has a pool, you

can expect your pool to decrease your property value

. … Removing your pool also allows your property to have more outdoor green space.

How much does it cost to restore a filled in pool?

Type Average Cost Above Ground Pool Only $300 – $800 Above Ground Pool + Deck $1,000 – $3,500 Inground Partial Fill-In

$2,000 – $10,300
Inground Full Removal $4,300 – $16,400

How much does it cost to fill in an inground pool?

The average price to fill in an inground swimming pool is

between $3,500 and $5,000

.

Can you build on a filled in pool?

Many councils prefer you to completely remove the base of the pool,

fill it with soil

and extend the concrete piers beyond the fill and into firm natural ground. This method eliminates the risk of anyone falling into the pool and the chance of water building up underneath the Granny Flat.

What is the cheapest way to fill a pool with water?

  1. Your Water.
  2. Call the water company and tell them you are going to fill your swimming pool. …
  3. Run the hose to the pool with enough slack that the end of the hose is on the bottom of the pool.

Can I put sand around my inground pool?


Sand

.

Sand can be used for backfilling the area around a pool during installation

. Sand can be mixed with concrete to prevent settling. Occasionally, sand can retain water and push against the pool walls, causing them to bulge.

Kim Nguyen
Author
Kim Nguyen
Kim Nguyen is a fitness expert and personal trainer with over 15 years of experience in the industry. She is a certified strength and conditioning specialist and has trained a variety of clients, from professional athletes to everyday fitness enthusiasts. Kim is passionate about helping people achieve their fitness goals and promoting a healthy, active lifestyle.