Moving your furnace and water heater to a new location could cost anywhere
between $800 and $13,000
. If you’re seeking an open layout for your home, your water heater and furnace might get in the way (literally). Luckily, moving them is an option, but it can get pricey for more complex jobs.
Is it difficult to relocate a furnace?
Whatever the motivation, furnace relocation is a costly job that you should consider carefully. Moving your furnace
is absolutely a task for an HVAC professional
. … So many factors play into moving an HVAC unit that it’s impossible to set a solid price without a thorough inspection and bid from a professional.
Can I relocate my furnace?
Overall, moving your water heater and furnace to a different spot in your basement can be quite expensive. The most expensive part of moving your units comes from the labor involved with changing plumbing, ductwork, drains and vents. … Moving the furnace requires
a new pipe to your AC
, which isn’t always possible.
Can you move furnace to the garage?
Sadly, the answer is
yes
. The building codes say you can put your HVAC system and ductwork in a garage as long as you meet certain requirements. … Mechanical Code 304.6: Appliances located in private garages and carports shall be installed with a minimum clearance of 6 feet above the floor.
How much does it cost to relocate an HVAC system?
Answered by LCD: I would figure
about $500-800
for the HVAC technician – plus maybe about $300 range for an electrician to move the electrical connection. If you mean just a wall fan/evaporator unit running off a mini-split A/C, probably more like $250-350 plus the electrician if needed.
Where should a furnace be located in a house?
Typically your furnace is
centrally located in the home
. It is usually located in an area such as a utility closet (by a cold air return), garage, attic, basement, or crawlspace; in the case of a heat-pump (a dual-system) it will be located outside of the home.
How much does it cost to reroute ductwork?
Air Duct Replacement Cost. Replacing ductwork costs
$12 to $25 per linear foot
. This includes the price to remove the existing materials and install new. If you have to cut into the floor or ceiling to reach it, add an extra $550 to $1,750 to the total.
Should a furnace be off the floor?
First and foremost, furnaces should be placed on rubber pads to minimize the noise they make. Then, if they happen to be located in the basement, they should be propped up on blocks or something else that keeps them at
least four inches off the floor
in case the basement floods.
How close can a bedroom be to a furnace?
As a general recommendation, your heater should be
30 inches away from furnace room walls on all sides
. This allows our service experts to comfortably replace it. You also need to check the space has enough airflow and ventilation, especially if you have an aging furnace with a metal flue.
Can a furnace be in a bathroom?
Appliances shall not be located in
sleeping rooms, bathrooms, toilet rooms, storage closets or surgical rooms, or in a space that opens only into such rooms or spaces, except where the installation complies with one of the following: Click to expand…
How hard is it to relocate an AC unit?
Moving most HVAC units requires
a full drawdown and storage of your system’s refrigerant
— a task that requires special tools and training to safely complete. In short, you’re better off leaving the relocation in the hands of seasoned professionals.
Can you move HVAC ducts?
Ductwork for air conditioning and heating systems consists of supply ducts that dispense air and return ducts that draw air. … The average home improvement enthusiast can relocate the
ductwork on interior walls that aren’t
bearing weight using parts found at home centers and air conditioning supply outlets.
How Far Can AC unit be from house?
Your condenser unit should be placed in a space that allows it to breathe freely. This means there should not be any large obstructions within at least
3-4 feet
of your unit. If your home has multiple condenser units, they should be placed far enough away from each other that they do not hinder one another’s airflow.
Does a furnace need to be in the middle of the house?
Energy Intake: The furnace needs to be located somewhere in
your home where there is either a natural gas line connection or sufficient electrical connection
. Venting: The furnace needs to be installed where there is either a pre-existing furnace vent or the capacity to install one in the ceiling.
Can you move a furnace to the attic?
The usual place you’ll find furnaces in homes across the U.S. is the basement. But in Southern California, basements are extremely rare, so most homes have floor furnaces (a.k.a. closet furnaces) instead. …
A furnace can be relocated from the closet into the attic
.
How much clearance is required around a furnace?
As a general rule of thumb, your heater should be
30 inches away from furnace room walls on all sides
. This allows our service professionals to conveniently work on it. You also need to make sure the room has enough airflow and ventilation, especially if you have an outdated furnace with a metal flue.
