Equipment Description Minimum Daily Rate | 4-Inch Barreto 2WD Hydraulic Trencher 3 Hours $200.00 | 4-Inch Barreto 4WD Hydraulic Trencher 3 Hours $225.00 | 6-Inch Barreto 4WD Hydraulic Trencher 3 Hours $225.00 |
---|
What does it cost to rent a Ditch Witch for a day?
On average, most Ditch Witch trencher machines can be rented for $130 to $300 for the day , depending upon the exact model and where you rent it. If you wanted to rent it for the week, the costs could drop by the day and could cost $400 to $600 per seven days.
How deep can a walk behind trencher dig?
You can commonly dig a trench from 12 to 48 inches deep and 3 to 16 inches wide using a rented walk-behind trencher. Most compact ride-on trenchers let you dig trenches about 48 inches deep and up to 12 inches wide, but some heavy-duty trenchers allow you to dig trenches as deep as 6 feet and as wide as 16 inches.
What is the fastest way to dig a trench?
- Water the soil for 1 hour the day before excavation.
- Use a trenching shovel to quickly excavate the trench.
- Use a pick mattock to dig up rocks and break through tough soil.
How much is a trencher worth?
Equipment (Trencher) $1.75 – $2.50 | Total Per Linear Foot $4 – $12 | Total Per 100 Linear Feet $400 – $1,200 |
---|
Where can I rent a Ditch Witch?
Rent a Trencher from The Home Depot Rental
The Home Depot Rental offers trencher rentals from well-known brands including Barreto, Boxer, Toro and Ditch Witch.
Will a Ditch Witch cut through roots?
Avoid using a trencher to cut through large tree roots if possible since larger roots increase the likelihood of problems with the cut. Although a trencher can be used to cut through roots, it was designed for creating trenches in soil and may not be able to handle large roots.
How deep will a 36 trencher dig?
Equipment Overview
The 36 inch walk-behind trencher offers operators a digging depth of 1 to 36 inches , and is the best choice to plow long rows of trenches. Because the walk-behind trencher is not a vehicle, it requires far less control to operate, and can easily maneuver around obstacles or within tight spaces.
How deep will a 24 trencher go?
Equipment Overview
Typical applications include installing trenches for phone, internet, or electrical cables, plumbing, and irrigation. As a 24 inch trencher, the walk behind trencher can reach a depth of 24 inches , and is ideal for maneuvering in an enclosed area or a work site with limited space.
How big of a trencher do I need?
A good rule of thumb: A walk-behind trencher will work best up to a depth of 48 inches and a width of 8 inches . Weighing these factors can save you time and money on the job.
What is the best tool for digging a trench?
- Corona SS General Purpose Trench Shovel. If you’re digging a drainage trench or laying a water pipe by hand, a trenching shovel is a must-have tool. ...
- Tabor Tools Pick Mattock. ...
- True Temper Drain Spade. ...
- Ames Saw-Tooth Border Edger. ...
- True Temper Bow Rake.
Is a trench a hole?
A trench is a deep and narrow hole, or ditch, in the ground , like the kind soldiers on frontlines might dig to give themselves shelter from the enemy.
How deep should a trench be for a water line?
The trench shall be excavated to the line and depth designated by the District to provide a minimum of 36 inches of cover over the pipe , and/or 30 inches of cover when crossing an existing roadway ditch, whichever is deeper, unless otherwise shown on the contract drawings.
How long does it take to use a trencher?
That should take you about 2 hours max . The worst thing about a walk behind is the back fill and tamping. It’s back breaking work. Plus it takes longer than the trenching.
How do you dig a trench for drainage?
Dig a trench that is 18 inches deep and 9–12 inches wide . Lay water-permeable landscaping fabric in the trench, followed by 3 inches of gravel. Lay your perforated drain pipe in the trench, cover with an additional 3 inches of gravel, and cover the drainage ditch with rocks, soil, or stones.
How long does it take to dig a trench with a backhoe?
Dug, pipe laid and backfilled about 11 to 13hours, only digging can be done in 9 hours or so . We average 280-300 ft per hour digging a 48′′ deep trench with an excavator putting in non grade lines to pivots. Usually we step the trench about a foot for ease of access.