As long as the lip plate itself is not damaged, it should be a relatively easy repair. Often, large round dents are easier to remove than small dents that place a crease in the metal. Prices will vary depending upon the severity and each repair shop has their own pricing but I would guess in the range of
$25-$50
.
Does a dent affect a flute?
As you described them,
very small dents will have little or no impact upon your flute’s sound
but I do suggest having a flute technician remove them. Minor dents are not difficult for a flute technician to repair.
How do you fix a bent flute?
How long does flute repair take?
A. A typical COA service takes approximately
1 week
to complete. Routine adjustments usually take 1-2 days to complete. Remember to include shipping times when considering how long you will be without your flute.
How often should you replace pads on a flute?
We spoke with Powell Repair Technician, Rachel Baker, to find out just how long one should expect a pad to “live.” She told us that on average, it’s about 5 years for flute pads, and
anything older than 6 or 7 years
should really be replaced.
How do you fix silver dents?
How do you fix a bent flute key?
What are the parts of the flute?
The flute has three main parts:
the head joint, the body and the foot joint
. The rod system works with the keys to make sure the right keys go up or down.
How do you fix a bent key on a clarinet?
How much is a new flute?
Beginner flutes usually range in cost from
$500 to $1000
. Intermediate, or step-up flutes usually cost $1,400 to $2,500 and entry level pro flutes (still largely played by advanced students) around $2500 and up.
Do flutes get old?
A flute gets old when it is not properly/regularly serviced or maintained
, but if you do regularly have it serviced it will be fine for decades. I would advise you to so so ASAP and you will notice the difference!
How do I know if my flute is broken?
Look for fraying, peeling, puffing, or tears in the “skin” of the pads
. If you see any of these, your flute can limp along for a while, but probably needs repair depending on the severity of the tears. Some bubbling or dirtiness is possibly okay.
Do flutes need to be tuned?
It’s normal for your flute to need adjustment
like this every time you play from few millimetres up to 15 millimetres. Depending on the environment you are playing in, it can be slightly different each time. Another way the length of the flute can be changed is by adjusting the cork inside the head joint.
Why does my flute sound so airy?
The most common cause of a fuzzy flute sound is that
the student simply isn’t using enough air
. Flute is the only wind instrument that does not have a mouthpiece placed directly in or completely covering the mouth.
Can you use Vaseline on flute?
You should never use cork grease or vaseline on the joints of the flute
. The keys themselves should only be oiled by a professional instrument repairer. The two joins on the flute (between the headjoint, the body and the footjoint) don’t need lubricating per se, but sometimes they can get a bit tight.
Can sterling silver dent?
Even though sterling silver is metal,
it can become scratched, dented and otherwise misshapen through wear and tear
.
Can silver plating be restored?
RESTORING AN ITEM’S INTENDED LUSTER
Silver-plated items offer a somewhat simpler solution through regular re-plating
. During a re-plating procedure, the old coating of silver is first removed. The metal must be completely clean for the plating to work.
Does silver dent easily?
Fine Silver
It’s soft and malleable, and
it easily gets scratches and dents
. It may not be best for rings and bracelets, but fine silver is best for necklaces and earrings.
What are the keys on a flute called?
The flute has special keys called the
“trill” keys
.
How many pads are on a flute?
16 * Flute Pads per Set
.
What are the notes on a flute?
This includes the notes
B flat, C, D, E flat, F, G, A, and then an additional B flat
. Starting with the B flat major scale makes it easier to understand the music theory behind what you play. You can start moving onto other scales and keys after getting down this fundamental flute scale.
What is the body of a flute called?
The Body of the Flute
On the body, there is a ridged top section known as
the barrel
(on the far right in the picture above), which is mainly decorative and usually features the name of the flute’s maker and model followed lower down by thirteen holes operated by a system of keys connected by rods.
Does a flute have a hole at the end?
The embouchure hole of a flute is always situated at a distance of 17mm from the cork
(more precisely, the near end of the reflective plate.) This is to correct the tuning of each octave, and especially in the third octave.
What are the holes in flute called?
Lip plates are found on the head joint of flutes, appearing as small curved or straight pieces of metal with a hole in the center known as the
embouchure hole
. Lip plates allow the player to rest the lower lip against the instrument for stability as air is blown into the embouchure hole with the mouth.
