How Much Does It Cost To Repair Vive Base Station?

1. Turn the base station off and on again.
2. Make sure that you’ve installed your base stations correctly. For details, see Installing SteamVR Base Station 2.0.
3. Restart the SteamVR app. If you still get an error, reboot your computer and reopen the SteamVR app.

How long do Vive base stations last?

Lighthouse base stations are designed to have a lifespan of

50,000 hours

– that’s almost 6 years nonstop : r/Vive.

Why is my Vive base station not working?

Turn the base station off and on again. Make sure that you’ve installed your base stations correctly. For details, see Installing the base stations. If the base stations have trouble wirelessly syncing with each other,

there might be an obstruction in your play area

.

Can Vive run without base stations?

Yes, because without base stations tracking the Vive headset won’t work

.

How do I reset my base station?

1. Disconnect the base station from power.
2. While holding down the reset button, plug the base station into power and continue to hold the reset button for about 5 seconds, until you see the three status lights turn on. Then release the button.

How many base stations do you need?

How many Base Stations do I need? We recommend

two Base Stations for most room-scale play areas

. If you’re covering an area larger than 5 x 5 meters (~16 x 16 feet), you can add additional Base Stations for additional tracking and increased accuracy.

DO base stations turn off?

You merely need to set up a few pre-requisites and for them to turn off automatically

.

How high up should Vive base stations be?

Mount the base stations diagonally and above head height, ideally

more than 2 m (6 ft 6 in)

. Secure the base stations in a location where they can’t be easily jostled or moved. Each base station has a 120-degree field of view, so it’s ideal to adjust its angle between 30 and 45 degrees to fully cover your play area.

Is it OK to leave base stations plugged in?

Yes – since the basestations are mechanical devices,

if you leave them plugged in without power management enabled and they stay fully powered on and spinning

– that uptime will count against the unit’s lifespan.

How do I reinstall my HTC Vive?

1. From your computer, open the VIVE Console app.
2. Click > Settings > Troubleshooting.
3. Tap Reset, and then wait for all related USB device drivers to be removed.
4. Turn off the link box, and then turn it back on. VIVE Console will reinstall the USB drivers.

How do I reset my HTC Vive?

1. From your computer, open the SteamVR app.
2. Right-click , and then click Restart headset.
3. Wait for the headset to finish restarting.

DO base stations need Bluetooth?

Using Bluetooth, SteamVR on your computer communicates with the base stations

. The only thing you need to do is connect it to your computer’s USB port and plug it in to use the power adapter. The link box of VIVE Pro must also be powered on if you are using it.

Does VR need a base station?

The base stations for your HTC Vive headset make your VR experience a more realistic and engaging one. But how many of those do you actually need?

Usually, two base stations are enough

. They can already provide a smooth-sailing adventure for you in those VR worlds.

Does Vive Pro 2 need base stations?

In order to function,

both the HTC Vive Pro and Vive Pro 2 require the setup of two base stations

which allow the headset to track where it is in the room and the movement of your head while you play. These base stations need to be purchased separately and set up in the room you intend to play in.

How does HTC base station work?

A base station is HTC Vive’s communication beacon. Base Stations power the presence and immersion of room-scale virtual reality by helping the Vive headset and controllers track their exact locations. According to XinReality, “Base Stations perform this function by

constantly flooding the room with a non-visible light

.

How do I reset my HTC Vive base station?

1. Unplug the power to the Base station.
2. Wait 5 seconds.
3. Plug the power back into the Base station.
4. This will reset the Base station.

Why is my base station blinking red?

A solid or flashing red light on a 2.0 base station usually indicates that

there is a mechanical problem within the station

. These usually require the device to have to be sent in for repair.

How do I clear my AirPort Extreme?

1. Open the AirPort Utility app on your Mac, located in the Utilities folder in the Applications folder. …
2. In the graphical overview, select the Time Capsule you want to erase, then click Edit. …
3. Click Disks, then click Erase Disk.

Can you use 3 base stations Vive?

You can use up to four base stations in a single room covering 10 m x 10 m (32 ft 10 in x 32 ft 10 in)

. Each base station in the same play area will need to be set to a different channel. This will be handled by the SteamVR software automatically. Each base station has a 150-degree horizontal field of view.

How many Vive base stations do you need?

You can use either SteamVRTM 2.0 or 1.0 base stations for tracking.

Up to four base stations can be connected simultaneously

. Four base stations 2.0 are recommended if you plan to move around the room while using the headset. Two base stations 2.0 or 1.0 are sufficient for sitting and stationary use.

Where do Vive base stations go?

1. Mount the base stations diagonally at opposite corners of your space. …
2. Adjust the base stations so that the front panels are facing toward the center of the play area.
3. Attach the power cables to the base stations, and then plug them each into a power outlet to turn them on.

How do I mount my HTC Vive base station without screws?

How do you clean a base station?

1. Unplug and unmount the base stations.
2. Use a lightly moistened non-abrasive cloth to clean the base stations. Do not use cleaning chemicals.
3. While cleaning the base stations, do not scratch the front panel nor disassemble any of its parts.

How do Vive base stations connect to PC?

Using a micro-USB cable, connect the base stations to one of your computer’s USB ports one at time

. While pressing the Channel button at the back of the base station, plug in the base station’s power adapter. Once the base station is detected by the SteamVR app, the firmware update will start automatically.

How many base stations do you need for full body tracking?

For full-body tracking experiences, you’ll want to add more Trackers. We recommend

3+ trackers

for a full-body tracking experience.

DO base stations need to see each other?

Base station light codes: green good, blue: stabilizing (make sure mounted to something sturdy–there’s a spinning motor inside), purple: syncing, blinking purple: can’t sync.

The base stations must be able to see each other

.

How many base stations do I need for Vive Pro 2?

The Vive Pro 2 currently ships only as a headset, but it requires

two compatible base stations

and two compatible motion controllers to fully work.