On average, replacing a CV boot, which in most cases will mean replacing the axle/shaft, can be expensive since it is difficult to access. On average, it can cost
between $175 to $350+ per CV boot
, depending upon the model, make and type of car, although some luxury vehicles can cost upwards of $1,000 each.
Can you drive with a broken axle boot?
It is possible to drive a car with a torn CV boot
, but doing so will likely lead to further damage that will eventually require more extensive repair. … Among the indications that a CV joint or axle has been damaged is a clicking or popping noise when turning, or vibrations at highway speeds.
Can you replace just the axle boot?
If no noise is present and only the CV boot is broken,
you can replace just the CV boot
. Tip: Before you install a new axle, check the CV joints (even when the boot is broken) and see if they are worth saving. If you need to replace the CV axle completely, the new CV axle will come with the boots already installed.
How much does it cost to replace inner CV boot?
On average, replacing a CV boot, which in most cases will mean replacing the axle/shaft, can be expensive since it is difficult to access. On average, it can cost
between $175 to $350+ per CV boot
, depending upon the model, make and type of car, although some luxury vehicles can cost upwards of $1,000 each.
How serious is a leaking CV boot?
But CV boots serve a simple but important purpose and allow the CV axles and joints to stay clean and enjoy a long service life. When a CV boot leaks,
it can cause the attached joint to become damaged posing a serious safety hazard
.
Can you replace CV boot without removing axle?
It is possible to do the outer boot without removing the axle
. You will need to unbolt the ball joiint and move the whole knuckle out of the way and angle the axle so you can access the outer joint. It might not be as easy to work with the outer joint with it in the car and not on a bench.
How long can I drive with a torn CV boot?
There is no real set time how long
the bad joint will last, and it may last a year or a month. A YourMechanic technician can travel to your location and help and replace the axle CV joint boot as soon as possible.
How long does it take to replace CV boot?
A do-it-yourself CV boot kit can cost $5-$30, depending on the make, model and type of vehicle, and the project typically takes
about three to four hours
. A replacement CV axle can cost $50-$150 or more, depending on the vehicle, and the project takes about half an hour.
Can you drive with a bad CV axle?
In a front-wheel drive car, the axles are connected to the wheels with Constant Velocity (CV) joints. … A severely worn out CV joint can even disintegrate while you're driving and make the car undrivable. You may lose control of the vehicle entirely.
It is not safe to drive with a damaged CV joint.
How do I know if my CV axle is bad?
- “Clicking” Noises When Turning.
- A Knocking Sound. …
- Grease on the Inside or Edge of the Tires. …
- Vibration While Driving. This is a tricky one, since there are many things that could cause vibration when you drive. …
What causes an axle boot leak?
A grease leak is the first symptom that is most commonly associated with a bad or failing CV boot. Over time, with exposure to the elements a CV boot can become dry or brittle and crack or tear. … A torn boot can also allow dirt, debris, and moisture to enter the CV joint, which will damage the joint.
What causes a torn CV boot?
The most common cause of CV joint failure is from
the deterioration and splitting or tearing of the
rubber CV Boot. Once split the protective CV joint grease escapes and dirt, road grime and water can enter the joint and cause the CV joint to wear rapidly and fail prematurely.
What happens if your axle is leaking?
An axle seal
leaks more during highway driving
, so the oil drops on the driveway may not always be present. As more fluid is leaked out, the transmission fluid level drops and the transmission will start slipping. If not caught in time, the transmission may even get permanently damaged.
How hard is it to replace a CV boot?
replacing both
sides shouldn't take any more than 4 hours
. have your manual with you, you'd probably need to undo the cv lock nut, separate complete hub assembly from the strut, pull the cv out.
How do you fix a torn CV axle boot?
By replacing a torn CV Boot, the joint can be saved keeping the grease in the joint and protecting it from wear.
CV Boots should be inspected regularly and replaced immediately if torn
. This type of preventative repair can save a lot of money and frustration down the road.
Can you repair a CV axle boot?
Split boot kits are a quick fix, but new boots go the distance. New or remanufactured replacement CV axle half shafts are the most efficient repair, but aren't readily available for 30-year-old low-production turbo specialty sports cars like the 1987 Mitsubishi Starion. Before you do anything, get the axle out.
