How Much Horsepower Does A 1965 Mustang 289 Have? - Fixanswer

Engine HP Torque	200 CID Inline-6 120 hp @ 4,400 RPM 190 lb-ft @ 2,400 RPM	289 CID 2-Barrel V8 200 hp @ 4,400 RPM 282 lb-ft @ 2,400 RPM	289 CID 4-Barrel V8 225 hp @ 4,800 RPM 305 lb-ft @ 3,200 RPM	289 CID Hi-PO V8 271 hp @ 6,000 RPM 312 lb-ft @ 3,400 RPM

How fast is a 1965 Mustang 289?

Turning to the question asked, a stock size tire, a 2.79 final gear ratio, (assuming a manual tranny with minimal slipage) and 4,500 rpm would get you about

122-125 mph top

speed.

How much does a 289 V8 horsepower?

Year 1965-67 “A” Code “K” Code Shelbys	Power (hp) 225 hp @ 4400 RPM 306 hp @ 6000 RPM	Torque (lb/ft) 305 lb/ft @ 3200 RPM 329 lb/ft @ 4200 RPM	Compression 10.0:1 10.5:1 (65)	Displacement 289 cu / 4.7 liters 289 cu / 4.7 liters

How much horsepower does a 289 have?

The 289 (1963-1968) was a high-revving, pint-sized powerhouse producing

195 and 210 horsepower

in base trim (two or four barrel carburetor, respectively), and 271 horsepower in HiPo (High Performance) form.

How can I get more horsepower out of my 289?

You can change the intake to a quality dual plane manifold, add headers, increase you cam’s lift and duration, add quality aluminum cylinder heads, increase your compression (beef up the bottom end). You most cost effective way to build a 289 is to not.

How fast can a 1965 Mustang go?

These updates amounted to 306 horsepower at 6,000 rpm – enough for a top speed of

138 mph

and a 0-to-60 mph time of 6.6 seconds.

How fast can a 289 engine go?

Acceleration Specifications

Its standing quarter mile was 15.2 seconds at 91 miles per hour and the top speed was

124 miles per hour

.

How much horsepower does a 1965 Mustang have?

The 1965 Mustang was available with two different engines, the 200 and the 289, although the 289 was available with three different power ratings. The 200 cubic inch six cylinder was standard equipment, and produced

120 horsepower

.

How much horsepower does a 1967 289 have?

Year 1967 “A” Code 1967 “K” Code	Power (hp) 225 hp @ 4400 RPM 271 hp @ 6000 RPM	Torque (lb/ft) 305 lb/ft @ 3200 RPM 312 lb/ft @ 3400 RPM	Compression 10.0:1 10.5:1 (65)	Displacement 289 cu / 4.7 liters 289 cu / 4.7 liters

How many liters is a 289 engine?

The 289 cu in (

4.7 L

) was also introduced in April 1963. Bore was expanded to 4.00 in (101.6 mm), becoming the standard bore for most small block engines. Stroke remained at 2.87 inches.

How much horsepower does a 66 Mustang 289 have?

Engine Name & Year Power (hp @ RPM)	1966 – 200 Thriftpower Six 120 hp @ 4400 RPM	1966 – 289 Windsor V8 (4.7 L) 200 hp @ 4400 RPM	1966 – 289 Windsor V8 (4.7 L) 225 hp @ 4800 RPM	1966 – 289 Windsor V8 (4.7 L) 271 hp @ 6000 RPM

How much HP can a 289 block handle?

If you rev an engine high enough it will make the HP (assuming it’s designed to do so), but it’s far from a good street engine. IMHO,

300-350hp

is pretty much the upper limit for a streetable 289.

What’s the difference between a 289 and 302?

The only difference between the 289 and 302 is the 302 has

a 1/8′′ longer stroke

.

How can you tell the difference between a 260 and a 289?

The main difference between a 260 and a 289 is

the 260 has a 6 inch space between the motor mount bolt holes

, while the 289 has a 7 inch space. All 260 engines have a 5-bolt bellhousing bolt pattern. The 1963 and 1964 1/2 289 engines have the same 5-bolt pattern. The 260 has a smaller cylinder bore.

Can a Ford 289 be stroked?

Remember, Ford stroked the 289

0.013 inch to achieve

302 ci. Another way to achieve stroke is to machine a larger crankshaft down to fit a smaller block. … We take a 351W crankshaft, machine the main journals and counterweights to fit the 289/302 block, and we end up with a 347ci stroker.

How big can you bore and stroke a 289?

Ford Stock Engine Bore and Stroke Guide	221 3.500 2.870	260 3.800 2.870	289 4.000 2.870	302 4.000 3.000

How much HP does a 1965 Shelby GT350 have?

MSRP (Street Version) $4,547	Horsepower 306 HP @ 6,000 RPM	Torque 329 ft.lb @ 4,200 rpm	Transmission 4-Speed Manual	Body & Frame Unitary Steel Monocoque w/Fiberglass Hood

Are 289 and 302 blocks the same?

A 289 and

302 block are identical for the 1968 year

. The crank has a slightly longer stroke on the 302. 3′′ on the 302, 2.87 on the 289. The piston has a slightly different pin height between the two engines.

How much horsepower does a 351 Windsor make?

Engine: Ford 351W V-8 (5.8L)	Peak Horsepower: • 1969 – 250 hp w/ 2 barrel carburetor, 300 hp @ 5,400 rpm w/ 4 barrel carburetor • 1972 (net power ratings adopted) – 153 hp w/ 2 barrel, 161 hp w/ 4 barrel • 1997 – 205 hp (CA version), 210 hp @ 3,600 rpm • Ford Lightning – 240 hp @ 4,200 rpm

Why are used Mustangs so cheap?

So why are Ford Mustangs so cheap? Used Ford Mustangs are so cheap

because there are just so many of them out there

. Since 1965, almost 10 million of them have been sold. With that many of them on the road, there will always be a good used market with some incredible deals.

How many Mustangs sold 1965?

Mustang Model Year Total U.S. Sales	1965 559,451	1966 607,568	1967 472,121	1968 317,404

How much horsepower does a 1968 Ford 289 have?

Year 1968 “C” code 1968 “K” Code	Power (hp) 195 hp @ 4,600 RPM 271 hp @ 6,000 RPM	Torque (lb/ft) 288 lb/ft @ 4,600 RPM 312 lb/ft @ 3,400 RPM	Compression 9.3:1 10.0:1 (66-67)	Displacement 289 cu / 4.7 liters 289 cu / 4.7 liters

What size engine does a 289 Mustang have?

engine displacement, type, carburetor type max. power at rpm max. torque at rpm	289 cu in (4.7 L) Windsor V8 (1965–1966) 4-barrel 225 bhp (168 kW; 228 PS) @ 4,800 305 lb⋅ft (414 N⋅m) @ 3,200	289 cu in (4.7 L) Windsor HiPo V8 (1964–1966) 4-barrel 271 bhp (202 kW; 275 PS) @ 6,000 312 lb⋅ft (423 N⋅m) @ 3,400

How much horsepower did a 67 Mustang have?

Engine Name & Year Power (hp @ RPM)	1967 – 390 FE V8 (6.4 L) 320 hp @ 4800 RPM	1967 – 289 Windsor V8 (4.7 L) 271 hp @ 6000 RPM	1967 – 289 Windsor V8 (4.7 L) 306 hp @ 6000 RPM	1967 – 289 Windsor V8 (4.7 L) 225 hp @ 4800 RPM

What is the rarest Mustang?

Rarity & Significance as

a Shelby American G.T.

#0139 isn’t just the rarest Ford Mustang or Shelby G.T. This convertible is undeniably the world’s rarest production automobile. The only 1967 Shelby G.T. convertible ordered, serialized and built.

What is the top speed of a 1967 Mustang?

Type 289 cubic inch Windsor V-8 engine	Output 306 HP	Top Speed 140 MPH	Transmission 4-Speed Manual

What engines will fit in a 1967 Mustang?

The twovalve/SOHC modular engine

can fit in the 1967 and later cars more easily because they originally had big-blocks available as an option. It’s much more difficult to put one in an earlier Mustang and really is not practical except for a special show car.

How much does a Ford 289 engine weigh?

It is actually close, the weight is

around 460 lbs

.

What engine did the 64 1/2 Mustang have?

The 64 1/2 convertibles had

a 289cid engine

, and the hardtops came with the less powerful 260 V-8. Thirty five convertibles were sold to dealerships and 195 hardtops were given out in dealer contests held in April of 1964. Clearly the new Ford Mustang was suddenly everywhere!

How many 1967 Mustangs are left?

Body Style Total	Fastback 71,042	Convertible 44,808	Total 472,121

How much does a Ford 289 block weigh?

consider this: dry weight it will be around

350-400 lbs.

What year did Ford stop making the 289?

The 302 replaced the 289 in

1968

and had a 27-year production run, primarily as a Mustang engine option. Ford manufactured the 351 in Windsor, Ontario, and in Cleveland, hence the “351W” and “351C” designations. It was not a replacement engine, but one produced as an entirely separate power plant.

What is the biggest small block Ford engine?

The Z460

is the largest small block crate engine Ford Racing has ever built, packing 460 cubic inches, or 7.5 liters into its 351-based block. According to the team behind it, it’s streetable. And it puts out 575 horsepower and 575 pound-feet of torque.

What year did the 289 come out?

In

1963

, the 289 High Performance V-8 was introduced in the Ford Fairlane.

How much horsepower does a 302 Windsor have?

Engine: Ford 302 Windsor V-8 (5.0L)	Ignition: Standard distributor	Engine Weight: ~ 450 lbs	Engine Oil Capacity: 6 qts w/ filter	Peak Horsepower: 130 hp – 205 hp (see table below)

How do I identify a 289 hipo head?

Two dots, not one, cast into the head, valve spring cups cast into the heads, and treaded, not pressed in, rocker arm studs. Those are the easy ways of telling at a glance.

How do I identify a 289 engine?

Registered. If

you remove the Valve Covers

the Heads will be Stamped 289 or 302 inside as well as a Date Code in this format: [7L22] or [8A2] for example. The Casting Numbers for the Cylinder Heads are on bottom and only visible if the Heads are removed, typically.

Will a 302 intake fit a 289?

Edelbrock part #2121 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR.

Will not fit

Boss 302 or 255 c.i.d. V8’s.