General Information. The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm.
What’s the firing order of a Ford?
The firing order of all Ford 5.4 engines is 1-3-7-2-6-5-4-8. On the passenger side are cylinders 1, 2, 3, and 4, while on the driver’s side are cylinders 5, 6, 7, and 8.
What is the spark plug gap for a Ford 460?
046-.050
Is the Ford 460 a good engine?
the 460 is a solid and reliable engine, even when making better than 1.5hp per cubic inch. they do have some issues, fuel economy(like that matters if you plan on building a 460) is one of them.
How many miles per gallon does a 460 get?
The 460 engine from Ford is used in trucks and large cars like Lincolns. These engines are not fuel effecient, and some vehicles they are used in get less than 10 miles per gallon.
What gas mileage does a 460 get?
14.3 mpg on the highway, 10-12 in town, anywhere from 7-12mpg while towing depending on load.
How can I get better gas mileage in my 460?
Building an engine for torque will not in and of itself improve fuel economy. You’ll want to install either an overdrive transmission or extremely numerically low (under 3-to-1) rear-end gearing to keep the engine in its low-rpm sweet spot.
How many MPG does a 7.3 Powerstroke get?
Ford 7.3 MPG Vs. Over the entire span of their production range, 1999-2010, And Ford V10 gas engines produced a reported average MPG of between 8.1 and 11.7 MPG. Which holds true with our data of 7.3 Diesel MPG, at roughly 13-14 MPG, averaging around 25-30% better than a similarly powered gas engine.
What is the biggest Ford big block?
The BIG BLOCK is BACK!
What is the best Ford engine ever made?
The 7 Best Engine Ford Ever Made
Are 429 and 460 blocks the same?
What’s more, the 429 and 460 are completely interchangeable engines with their 4.36- inch bores. The only difference is stroke. The quickest path to displacement is the stock 460 crank. Drop a 460 crank into the 429 block and you have a 460.
What is the best small block Ford Motor?
Here are 10 great Ford crate engine options:
What is the best Ford racing engine?
Top 5 Ford Racing Crate Engines
What Ford engine has the most horsepower?
2020 Mustang Shelby GT500
Is 351 Cleveland better than Windsor?
The 351 Cleveland is a member of the 335 series family of Ford small-block engines. Its large ports and oversize canted valves give it more horsepower and allow it to run at a higher rpm than the Windsor. The valve covers have a twisting curve and are attached by eight bolts.
What is the difference between a Ford 351 Windsor and a 351 Cleveland?
Windsor valve covers use 6-bolt covers, whereas the Cleveland/Modified uses 8-bolt covers. Timing Chain. Cleveland/Modified engines have the timing chain recessed into the front of the block itself, and its timing cover is essentially just a flat piece of metal.
How much power can you get out of a 351 Cleveland?
With Ford’s 4.000-inch bore/4.000-inch stroke combination and conservative tuning, you can achieve 400 hp and 450 torque numbers along with durability.
What year is the best 351 Windsor?
From what I have read, the best year for 351W blocks are 1969, 70, and 71. For some reason these were the strongest 351W ever produced, but very hard to find.
Is 302 better than 351W?
So for equal money, a 351 will have more cubes, more low end torque, and a lower RPM peak. A 302 will have the same HP, but a slightly higher tq peak with lower tq numbers. In almost any situation, cubes are better.
Is 351 Windsor a good motor?
the 351w is a very good engine, it can handle a lot of power before the block splits, that usually happens at around 800hp. the 351m is an ok engine, good for use in trucks and for the basis of building a good 400. the 351c on the other hand is tough to beat, even by the chevy 350.
