SAE 5W-30 is preferred. Capacity:
6 quarts
(with filter)After refill check oil level.
How many quarts of oil does a 6.2 Denali take?
8 quarts
(with filter)After refill check oil level.
How much oil does a 2005 GMC Yukon take?
Capacity:
6 quarts
(with filter)After refill check oil level.
What kind of oil does a 2005 GMC Denali take?
Viscosity: 0W-30 (Below -29)
5W-30 (All TEMPS) SAE 5W-30
is preferred.
|
Capacity: 6 quarts (with filter)After refill check oil level.
|
Torque: 18 ft/lbs (Oil Drain Plug)
|
How much oil does a Denali take?
Capacity:
8 quarts
. (with filter)After refill check oil level.
What kind of transmission fluid does a 2005 GMC Yukon take?
GMC Yukon 2005,
ProfessionalTM Full Synthetic DexronTM VI Automatic Transmission Fluid
by ACDelco®.
What kind of oil does a 2005 Yukon XL take?
Viscosity: 0W-30 (Below -29)
5W-30 (All TEMPS) SAE 5W-30
is preferred.
|
Capacity: 6 quarts (with filter)After refill check oil level.
|
Torque: 18 ft/lbs (Oil Drain Plug)
|
How do you reset the oil life on a 2005 GMC Yukon?
-
Turn ignition switch to ON position with engine off.
-
Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
-
Change Oil lamp will flash for 2-10 seconds while it resets.
-
Once it stops flashing, the maintenance light reset is complete.
What kind of oil does a GMC Yukon take?
2019 GMC Yukon needs a
full synthetic oil at SAE 0W-20
. Both the 5.3L V8 engine and the 6.2L V8 engine hold 8 quarts of oil.
What kind of oil is SAE 5W-30?
5W-30 oil is the
lead viscosity recommendation
by automakers over the past four decades for use in many vehicle types – passenger cars, SUVs, light vans and trucks – including those with high-performance turbo-charged and supercharged engines.
How many quarts of oil does a 2007 6.2 Denali take?
SAE 5W-30 is preferred. Capacity:
6 quarts
(with filter)After refill check oil level.
How much oil does a Yukon Denali XL take?
The recommended oil for this engine size is
8 quarts of 0w-20 viscosity oil
. Similarly, the 6.2 liter engine Denali trim, uses the same amount and type. The larger engine doesn’t change the fact that the Denali also holds 8 quarts of 0w-20 oil.
How many quarts of transmission fluid does a GMC Yukon take?
Open the hood of the Yukon, and find the yellow transmission dipstick above the drain pan. Pull it out, and place a funnel into the tube. Pour in
four quarts
of transmission fluid.
What kind of transmission fluid does a 2003 GMC Yukon take?
GMC Yukon / Yukon XL 5.3L 2003,
ProfessionalTM Full Synthetic DexronTM VI Automatic Transmission Fluid
by ACDelco®.
What kind of transmission fluid does a 2007 Yukon take?
GMC Yukon Denali / Yukon XL Denali 2007, ProfessionalTM
Full Synthetic DexronTM VI Automatic Transmission Fluid
by ACDelco®. ACDelco DEXRON-VI Automatic Transmission Fluid is the most recent release in the well-established DEXRON…
What kind of oil does a 2004 GMC Yukon XL take?
Viscosity: 10W-30 (Above -18)
5W-30 (All TEMPS) SAE 5W-30 is
preferred.
|
Capacity: 6 quarts (with filter)After refill check oil level.
|
Torque: 18 ft/lbs (Oil Drain Plug)
|
Edited and fact-checked by the FixAnswer editorial team.