How many Litres of oil does a transit van take?
The 3.5L EcoBoost engine in a Transit van requires 4.5 liters (4.75 quarts) of oil with filter replacement.
That’s the standard capacity from 2010 all the way through 2026 for the EcoBoost 3.5L. After you’ve poured it in, always check the dipstick. You want the level just right—not a drop over. Stick to oil that meets Ford’s WSS-M2C945-B1 spec, or you’re asking for trouble.
What kind of oil does a 2010 Ford Transit take?
Motorcraft’s SAE 5W-20 Premium Synthetic Blend fits the bill and is what Ford recommends. Make sure it’s also API SN and ILSAC GF-5 rated. Swap the filter (Motorcraft FL-2087) every 7,500 miles—or sooner if your schedule demands it.
How many quarts does a Ford Transit take?
Transit models with 4-cylinder engines (e.g., 2.0L EcoBoost) take 4.5 quarts; V6 models (3.5L, 3.7L) take 6 quarts including filter.
Transit Connects with the 2.0L sipper sip 4.5 quarts. Bigger Transit vans with the 3.5L or 3.7L V6 guzzle 6 quarts. Pop the hood or check the build sheet before you start pouring—you don’t want to guess wrong.
How much oil does a 3.7 Transit take?
The Ford Transit with the 3.7L V6 engine requires 6 quarts of 5W-20 oil when the filter is replaced.
You’ll mostly see this engine in E-Series cutaways and stripped chassis rigs. Motorcraft SAE 5W-20 or an equivalent that meets WSS-M2C913-D works fine. Torque the drain plug to 20 ft-lbs and swap in a fresh Motorcraft FL-2087 filter every time.
How many quarts of oil does a 2013 Transit Connect take?
A 2013 Ford Transit Connect with the 2.0L engine requires 4.49 US quarts (4.25 liters) of 5W-20 oil with filter.
That’s the total after the filter’s full. Stick to Ford WSS-M2C930-A or better. Even four extra ounces can wreck your catalytic converter, so wipe the dipstick clean and double-check. Park on level ground before you measure.
What oil does a Ford transit use?
| Engine | Oil Viscosity | Capacity (with filter) |
|---|
| 2.0L EcoBoost | 5W-30 | 4.5 quarts |
| 3.5L EcoBoost | 5W-30 / 5W-20* | 6 quarts |
| 3.7L V6 | 5W-20 | 6 quarts |
| 3.2L Power Stroke (diesel) | 5W-40 | 7.9 quarts |
Always peek at the sticker under the hood—it’s the final word. Oil drain plug torque sits at 20 ft-lbs.
How much oil does a Ford Transit 3.5 take?
A Ford Transit with the 3.5L EcoBoost engine requires 6 quarts of 5W-20 oil when the filter is replaced.
That’s true for every Transit from 2010 through 2026. Motorcraft SAE 5W-20 or an equivalent that meets WSS-M2C945-B1 is what you need. Never overfill—too much oil turns to foam and can wreck your engine.
What is the cargo volume of the LWB cargo van behind the first row?
A Long Wheelbase (LWB) Ford Transit cargo van offers 127.4 cubic feet of cargo space behind the first row of seats.
Short Wheelbase (SWB) models squeeze out 104.8 cubic feet. These numbers come straight from Ford’s 2026 specs and assume no rear seats. Roof height and model tweak the load limits, so plan accordingly.
How much oil does a 2019 transit hold?
A 2019 Ford Transit with the 3.5L EcoBoost engine holds 6 quarts of oil including the filter.
Applies to Transit 150/250/350 models rocking the V6. Use SAE 5W-20 oil that meets Ford WSS-M2C945-B1. Park on flat ground, fill it up, then check the dipstick while it’s still cool.
How do you reset the oil life on a 2017 Ford Transit?
To reset the oil life monitor on a 2017 Ford Transit: turn ignition to ON, press and hold both brake and accelerator pedals for 3 seconds until "Service: Oil reset in prog" appears, then release.
After about ten seconds the screen flips to “Service Reset Complete.” If nothing happens, make sure all your electricals are alive and try again. No tools required—just your feet and patience.
What kind of oil does a 2019 transit van take?
Motorcraft SAE 5W-40 is the go-to. Gasoline 3.5L models still want 5W-20. Always trust the label under the hood—it’s the last word. The diesel guzzles 7.9 quarts with the filter.
How much oil does a 2011 Transit Connect take?
A 2011 Ford Transit Connect with the 2.0L engine takes 4.5 quarts of 5W-20 oil including the oil filter.
Same story for 2010–2014 Transit Connects with the 2.0L I4. Use oil that meets Ford WSS-M2C930-A or better. When you’re done, recycle the old oil at a certified drop-off—don’t toss it in the trash.
How do you reset the oil light on a Ford Transit?
To reset the oil change light on a Ford Transit: turn ignition to ON (do not start engine), press and hold both accelerator and brake pedals fully for 25 seconds.
Let go when the oil light flashes or the message changes. Turn the key off, then back to ON to confirm. Works on most 2015–2026 Transits. If the light pops back on right away, a scan tool reset might be in order.
Can I use 5w40 instead of 5w30?
Yes, you can safely use 5W-40 oil in place of 5W-30 if the engine is designed for either viscosity and the oil meets the required Ford specification.
5W-40 holds up better under heat and load than 5W-30, but you might shave off a tiny bit of fuel economy. Check the sticker or manual first—no mixing viscosities. Drain the old oil completely before you switch.
