Whether you plan to self install or hire a contractor. But as a basic rule of thumb, an installed, four foot high galvanized chain link fence in a major city will cost you anything from
around $18 per linear foot
, not including any gates, and assuming your site is clear, level and doesn’t have too many corners.
How much does it cost to build a 200 ft fence?
| Linear Feet Average Cost Highest Cost | 200 $2,200 $3,000 | 300 $3,300 $4,500 | 400 $4,400 $6,000 | 500 $5,500 $7,500 |
|---|
How much does it cost to install 200 feet of chain link fence?
| Linear Feet 4-foot Tall 6-foot Tall | 200 $2,400 $3,000 |
|---|
Is it cheaper to install chain link fence?
Even with their separate components – including metal stakes, galvanized posts, brackets and tie wires –
chain link fences are almost always cheaper to purchase and install than wood
, regardless of the type of lumber in consideration.
How much does it cost to install 150 ft of fence?
The average 150-foot privacy fence costs
$2,750
with a typical range of $1,500 to $8,250. In total, it’ll run you $10 to $55 total per linear foot. You’ll spend $750 to $6,000 on materials and $750 to $2,250 on labor.
Do I need a permit to build a fence?
Basic repairs to any fence almost universally do not require a permit
, but the definition of what constitutes a repair can be fairly strict. Typically, you’re allowed to make repairs on a 1:1 basis. That means if you take out a wooden six-foot post, you have to replace it with the same type and style of post.
What’s the cheapest fence to install?
- Treated pine ($12 to $19 per linear foot installed) …
- Chain link ($10 to $20 per linear foot) …
- Wrought iron ($24 to $32 per linear foot) …
- Barbed wire ($1.50 to $2 per linear foot) …
- Hog wire ($3 to $5 per linear foot) …
- Electric ($1 to $6 per linear foot) …
- Pallet (free!)
Does a chain link fence increase property value?
Chain-link fencing may not raise your property value
, but you can purchase fencing materials from Shur-Way Building Center in Vancouver, WA no matter what your fencing needs are! A typical chain link fence isn’t going to do much for your home’s market value.
How deep do chain link fence posts need to be?
The answer -— as it often does in fencing construction — depends. As a general rule, Fencing Direct recommends at least a
24-inch footing depth for a 4-foot fence
, plus an extra 3 inches for every foot of height (for example, 27 inches for a 5-foot post).
How long does chain link fence last?
On average, you can expect your chain link fence to last
15 years
. While it’s more durable than an alternative like wood, it’s especially prone to sagging due to loose posts or stretched tension wires.
Which fence panels last the longest?
Vinyl fencing
: Vinyl fencing can last 30+ years with minimal maintenance required. Unlike wood that can warp, rot, or shrink over time, vinyl is rigid and resilient. It is resistant to pests, rain, snow, temperature changes, and other elements. That is why vinyl fencing is the longest lasting fence material.
Can I install a fence myself?
Typically, a fence can be
installed in one to three days by professionals
. So rather than spending time on research, preparation, and hours of hard labor on installing a fence yourself, you can relax and let experienced professionals take care of it for you instead.
How do I estimate the cost of a fence?
Fence installation costs
$1,500 to $3,000 for an average yard
with most homeowners spending about $1,800. New fencing costs $5 to $16 per linear foot, or about $2,016 to $9,011 for 1 acre. Prices depend on the type of fence materials used and the length and height of the fence.
How much does installing a fence cost?
How much does a fence cost? A fence costs about
$7 and $50 per linear foot
to install. The average total cost of installing a fence is approximately $988, but costs can reach $7,000 — or more. The length of the fence, materials used and add-ons can impact your total fence installation costs.
