A complete inspection of your Ansul kitchen hood fire suppression system should happen regularly —
at least once every six months
, according to NFPA 96. To complete the inspection, you’ll need to first coordinate maintenance with a factory authorized, trained service technician.
How often should an ANSUL system be serviced?
Maintenance is a vital step in the performance of a fire suppression system. A system inspection must be performed by an authorized ANSUL distributor at regular intervals,
not more than one year apart
and cylinder contents should be verified every six months.
How do I service my ANSUL system?
- Keep all kitchen equipment free of grease build-up.
- Always run the exhaust system during appliance preheat, cooking and cooling.
- Never operate exhaust systems without filters in place.
- Never restrict air intake passages for the exhaust system.
How often should your hood suppression system be inspected?
Per NFPA 17 and manufacturer requirements, the kitchen hood suppression system is required to be inspected
every 6-months
. Click to learn what goes into a kitchen suppression system inspection.
How often does the liquid fire suppressant need to be replaced?
A: Every system except Ansul, activation cartridges need to be replaced
every six months
. Ansul requires their activation cartridges be hydro-statically tested and recharged every twelve years, but due to the cost of this service, it is more economical to replace the cartridge. Q: What is a purge test?
What chemical is in an Ansul system?
A fire extinguisher or an ANSUL system applies an agent that either displaces the oxygen in its surrounding or cools the burning fuel to smother fires effectively.
Carbon dioxide
is commonly used and is a smothering material.
What is Ansul inspection?
A
complete inspection of your Ansul kitchen hood fire suppression system should happen regularly
— at least once every six months, according to NFPA 96. To complete the inspection, you’ll need to first coordinate maintenance with a factory authorized, trained service technician.
How much does an Ansul system cost?
The Ansul R-102 uses a low pH liquid agent and is designed for a variety of appliances. It also detects fires in ventilating equipment, including hoods, ducts, and grease extractors. Costs range from
around $3,000 to around $5,500
.
How much does a suppression system cost?
The price for a restaurant fire suppression system is
around $100 per tank
with no fire department involved, and around $120 per tank with the fire department involved.
What color is Ansul?
ANSUL®
Purple
-K dry chemical agent may be used to combat fires in flammable liquids, gases, and greases (Class B) including such fires when involved with energized electrical equipment (Class C).
How do you dispose of Ansulex?
Use a
non-combustible material like vermiculite, sand or earth to soak up the product
and place into a container for later disposal. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Never return spills in original containers for re-use. Following product recovery, flush area with water.
Can an Ansul system freeze?
This blend provides a strong measure of freeze protection along with the foaming properties associated with conventional Class B liquid agents. … The agent flows readily into areas where flammable liquids may settle.
What triggers an Ansul system?
How it works – When a fire occurs in a protected area, it is quickly detected by the sensors the
cooker appliance hood
. The detectors trigger the Ansul Automan releasing mechanism which actuates the system – pressuring the agent storage tank and automatically shutting off the appliance energy.
What is a fire Ansul?
ANSUL is
a line of special hazard fire protection products designed
to meet strict standards and tested under the scrutiny of independent labs and approval agencies all over the world. Tyco Fire Protection Products introduced this premium brand in 1939.
What kind of fire extinguisher is used for pool chemicals?
NFPA 10 contains the following: • Only
water-type extinguishers
shall be installed in areas containing oxidizers such as pool chemicals. Multipurpose dry chemical fire extinguishers shall not be installed in areas containing oxidizers such as pool chemicals.
