How Often Do Rear Brakes Need To Be Replaced?

by | Last updated on January 24, 2024

, , , ,

As a general rule, you should get your replaced

every 10,000 to 20,000 miles

to keep wear to a minimum. When it comes to your rotors, you have a bit longer. Your rotors should be replaced between 50,000 and 70,000 miles to keep your brakes in peak health.

How many miles do rear brakes last?

Average brake life runs

between 25,000 and 65,000 miles

, though some people will have brake pads last beyond 80,000 miles. While it's impossible to give an exact number, the 40,000-mile range is the general mileage to keep in mind when planning for vehicle maintenance.

Do rear brakes wear out faster?

Usually, it's the front ones that wear faster, NAPA explains. That's because braking shifts the car's weight forward, which means the front rotors need to be stronger, NAPA explains. But there is a reason why

rear brake pads can wear faster than expected

: traction control and electronic stability control.

Do I need to change rear brakes?


There is no set mileage to change

. Some cars will go for many more miles than others with the original set of rear brakes. The braking habits of the driver as well as the quality of the original brakes are far more indicative of when brakes should be replaced than the mileage on the vehicle's odometer.

How much should a rear brake job cost?

Expect a brake job of replacing brake pads and rotors to cost

$250-$400 per axle on average

. If you drive a heavy-duty pickup truck and haul or tow a lot, your costs may go up quite a built.

Should you replace front and rear brakes at the same time?

Most mechanics recommend replacing brake pads in the front or brake pads in

the rear at the same time

. If one brake pad on the front axle is replaced, then all brake pads on the front axle should be replaced.

Do rear brakes do anything?

Overall vehicle design determines front brakes vs rear brakes bias, but most

rear brakes should never provide more than 40 percent of the stopping power at any given time

. As such, they don't develop nearly as much heat as the front brakes.

Are front or rear brakes more important?


Front brakes wear quicker than rear brakes

because they do most of the stopping. Front brake rotors are usually vented and have fins sandwiched between the two surface, while are usually solid metal discs.

How much does a brake job cost?

A complete brake repair — one that includes pads, rotor and caliper replacement — typically averages

between $300 and $800

. However, depending on the make and model of your vehicle, you can easily spend more than $1,000 on a complete brake job.

How do you know when your rear brakes are bad?

  1. Listen to the sounds of your brakes. The most obvious indicator your rear brakes need replacing is the squeaking that you hear when you press down on the brakes. …
  2. Respond to the service light in your car. …
  3. Check your brake fluid. …
  4. Press down on your brake pedal for resistance.

Are back brakes more expensive?

Unfortunately, our world is festooned with imperfections, and higher prices for

rear

brakes just happens to be one of them. If you have rear disc brakes, this repair (with just the standard pad/rotor replacement) will run $25-$75 higher than the front brake repair, on average.

How much does Midas charge for a brake job?

Midas: Midas charges roughly

$80 per hour

for labor costs when working on brakes. They charge about $50 for a brake drum package, $60 to replace brake fluid, and upwards of $800 for a complete caliper and rotor job.

Can I just replace brake pads and not rotors?


Yes

, but it depends on the condition of your brake rotors. If they aren't damaged or thinned beyond the discard thickness, you can definitely change just the worn brake pads. As we know, brake rotors and brake pads work together. …

Do front or rear brake pads wear out faster?


Your front brake pads will also wear down faster than your rear pads

. The front of your vehicle handles a lot more weight transfer as you brake, causing more wear. Over time heat and friction also contribute to brake pad wear.

How many hours does a brake job take?

Generally, A Brake inspection takes 30 minutes to 1 hour to replace the brakes including rotors and pads, & other vehicle components. Originally Answered: How long should brake service normally take? With all the proper tools and equipments it should only take

about 45 to an hour tops

.

How long does a brake job take?

How many hours does a brake job take? Generally, A Brake inspection takes

30 minutes to 1 hour

to replace the brakes including rotors and pads, & other vehicle components.

Emily Lee
Author
Emily Lee
Emily Lee is a freelance writer and artist based in New York City. She’s an accomplished writer with a deep passion for the arts, and brings a unique perspective to the world of entertainment. Emily has written about art, entertainment, and pop culture.