signal continuously for
at least 100 feet before you turn or stop
. be sure to turn off your signal light after you use it. your unintended signal still means “turn” to other drivers. You just studied 14 terms!
How soon before making a turn should the signal lights be used?
You should signal
at least 100 feet before you turn
so the other drivers can be ready. Check your vehicle’s turn signals often to ensure they are working properly. The pictures below show the correct hand signals to use when turning or stopping.
When must you signal before making a turn quizlet?
You should signal during
the last 100 feet before turning
.
How many seconds ahead should you signal before turning?
You should signal
at least 100 feet before you
turn so the other drivers can be ready. Check your vehicle’s turn signals often to ensure they are working properly.
What is the goal of signaling drivers ed?
Signaling, before even checking your mirrors and blind spot, gives
the drivers around you the opportunity to potentially alter their speed or path in order to allow you a safer and more simple lane change
. While changing lanes, keep your turn signal on until you’ve completed the lane change.
Why is signaling the first step in the lane change procedure?
1. When you plan to change lanes, turn, or enter or exit a highway,
first give the proper turn signal
. Using your turn signal, which is required by law, communicates your intended movement to drivers around you. Develop a good habit and use turn signals or hand signals even if no other traffic is on the road.
When driving down a mountain road you should never?
Don’t go down a mountain road
any faster than you can go up it
. Don’t use your brakes to hold your downhill speed. Down shift to S or L – the only time you should step on your brake pedal is to slow while you are shifting down to a lower gear. Resist the temptation of zooming down a hill.
What is the 3/6 second rule?
The 3-6 second rule ensures the
proper “space cushion”
to keep you and other drivers safe. When driving on slippery roads, you should double your following distance to at least… 4 seconds. Stay to the right and only use the left lane for passing.
When should your car be positioned next to the center line?
an approach for a left
turn
should be made in the part of the left half of the roadway nearest the center line on a two-lane road with traffic in both directions. C.) give a turn signal for at least the last 50 feet before you make your turn. make up your mind about your turn before you get to the turning point.
Under what circumstances should you delay your turn signal as you approach your intended turn?
| Question Answer | When should you delay your turn signal as you approach your intended turn? When it might mislead a driver | When you’re in the left turn lane of a 4 lane road and the right lane is backed up, what should you predict will happen? (your lane is moving well) People will move into your lane |
|---|
At what speed should you be making your turn?
Generally the ideal speed at the
apex of a right turn is 10-15 MPH
. The ideal speed in the middle of a left turn is usually 15-20 MPH. The ideal turn speed will vary depending on the width of the road, degree of the turn and weather conditions, but the speeds stated above will be accurate about 85-90% of the time.
What is the first thing a driver should do after deciding to make a turn?
What is the first thing a driver must do after deciding to make a turn?
First you will need to stop at the stop line
, make sure that you do not interfere with pedestrians, bicyclists, or vehicles moving on their green light, and make a turn. If a street has a left turn lane, you must use it when you turn left.
What are the turning rules?
As you prepare to turn, reduce speed and stay as far to the right as possible. Begin the turn in the lane nearest to the right-hand curb and end the turn in the lane nearest the right-hand curb.
Give turn signal
. Yield to pedestrians who may be crossing your path.
What are the four things you should do before making a lane change?
- Turn on your signal.
- Check your mirrors.
- Check your blind spot by looking over your shoulder.
- If it is safe, change lanes.
- Turn off your signal after completing the lane change.
What are the rules for merging traffic?
According to the California Driver Handbook,
drivers must enter the freeway at or near the speed of traffic and should not stop before merging into traffic unless it is absolutely necessary
. Drivers are also discouraged from trying to merge into small gaps to avoid following too closely.
At what speed should you drive in a one way alley?
The speed limit in any alley is
15 mph
.
