Press and hold the power button for 5 seconds to enter pairing mode
. The LED indicator will flash blue and red repeatedly while in discovery. Enable the Bluetooth® settings on your device and select “Trekz Titanium by AfterShokz”. The LED indicator will turn blue once connected.
Why won’t my AfterShokz won’t pair?
Your headphones just need to be reset
. 1) Start with your headphones powered off and cleared from your devices’ Bluetooth settings. 2) Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. Your headset will turn on (continue holding the button) and then the LED light will flash red and blue.
How do I pair my Trekz titanium to my phone?
For Android
Open Settings on your device, tap on ‘Bluetooth’, and turn it on
. Now, you will need to wait for your device to discover the headphones. You will be able to see the headphones on the list under ‘Available Devices’. When you do, tap on it, and pairing will be done.
How do I reset my Trekz air?
Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations
. 4. Turn your headphones off. Trekz Air is now reset and can be re-paired to your device.
How do I switch between devices in AfterShokz?
Hi there – AfterShokz here. Your headphones will always default to play on Device 1 when you’re paired to numerous devices. To play on Device 2, just
hit play on that device and it will switch
.
How do I pair my Trekz air?
Start with your headphones turned off. Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Audrey will say “Welcome to Trekz Air.” Continue holding volume+ until the LED light flashes red and blue. Open your device’s Bluetooth settings and select “Trekz Air by AfterShokz.” Audrey will say “Connected.”
How do I connect my AfterShokz to my Iphone?
Enter pairing mode by
pressing and holding volume+ for 5-7 seconds
. Audrey will say “Welcome to AfterShokz.” 3. Continue holding volume+ until the LED light flashes red and blue.
Can I connect AfterShokz to 2 devices?
Multipoint pairing allows you to be connected to two Bluetooth devices at the same time
. While you won’t receive input from both devices at the same time, you’ll be able to seamlessly transition from one device to the other.
All AfterShokz wireless Bluetooth headphones include a multifunction button. It can be located
on the outside of your headphone’s left transducer
. Simply run your finger along the transducer while wearing AfterShokz and you’ll feel it!
How do I pair my Trekz Titanium to my Iphone?
Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Audrey will say “Welcome to Trekz Titanium.” Continue holding volume+ until the LED light flashes red and blue. Open your device’s Bluetooth settings and select Titanium by AfterShokz. Audrey will say “Connected.”
Why won’t my Trekz Titanium won’t connect?
Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds
. You’ll hear beeps and/or feel vibrations. Turn your headphones off. Your headphones are now reset and can be re-paired to your device.
How do you reset Trekz Titanium?
To reset Titanium:
Press and hold the multifunction button, power/volume+ button and volume- button (all three buttons) simultaneously for 3–5 seconds
. You’ll hear 2 beeps and/or feel vibrations. Turn your headphones off.
How do I connect Trekz air to two devices?
To pair multiple devices through multipoint pairing: Start with your headphones turned off. Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue. Press and hold the multifunction button and volume+ button for 2-3 seconds.
How do you reset Trekz AfterShokz?
Your AfterShokz will turn on, and then the LED light will flash red and blue.
Press and hold the multifunction button, power/volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds
. You’ll hear 2 beeps and/or feel vibrations.
Why are my AfterShokz blinking red and blue?
The headphones are in pairing or discovery mode
This puts the headphones in pairing mode, which makes the status lights blink red and blue. The solution is to pair your headphones with the other device again.
Can I pair my Bluetooth headset with multiple devices?
The headphones can be registered (paired with) up to eight different devices
, but can transmit/receive from only one device at a time. Therefore, “Multipoint” connections aren’t supported. When the headset is paired with two or more devices, you’ll need to switch the BluetoothTM connection to the desired device.
Do AfterShokz work with iPhones?
Hi there – AfterShokz here.
Trekz Titanium will connect to any Bluetooth compatible device, including iPhones and iPods that have Bluetooth capabilities
.
Do AfterShokz work with Siri?
That’s where the digital note-taking is so clutch –
you can use AfterShokz, Siri, and your text message service
to take notes on your run, ride, or hike – all without breaking stride.
Is there an app for AfterShokz?
There’s no app
so you can’t customize controls, listening profiles, or eventually update the Aeropex’s firmware. Design and build quality are near perfect. I had the AfterShokz Bluez previously, which were larger, heavier, more brute, and had a lot of shiny plastic.
