TiVo Roamio
How to reset TiVo Box. If the Virgin TiVo box isn’t responding to the remote, you can also
press and hold the Standby button on the front on the TiVo box for 5 seconds to restart it
, or use the Power switch on the back of the TiVo box.
What does restarting the TiVo box do?
Restart the TiVo box/DVR:
Shuts down the TiVo box and starts it up again
. This will not affect recorded shows, OnePass/ Season Pass recordings, WishList searches, or TiVo Suggestions. You may need to restart your TiVo box as a routine troubleshooting step.
Why is TiVo not working?
Power cycle your TiVo device, modem and router
. Unplug your modem and router then wait 10 seconds and plug them back in. A full restart can take 30-60 seconds. Unplug your TiVo device’s power cord for 20 seconds, then plug it back in.
Why is my TiVo box stuck on starting up?
Check The HDMI Cable
Move to the back of your TV box and detach the HDMI cable. Wait for 15 to 20 seconds. Next, reattach all the cables firmly back into the TiVo box and the TV. Turn on your TiVO box and see if the issue persists.
What is the red light on my TiVo box?
A red light means
the remote is in IR mode
. With IR mode, you’re not paired to a specific receiver, so you have to make sure you’re pointing it directly at your TiVo box every time you press a button.
Why are all the lights flashing on my TiVo?
TiVo Bolt Series6
If all lights flash and do not stop flashing, that’s most almost definitely a
failed hard drive
. If all lights flash, Replacement hard drive kit or TiVo Repair Service, including possible data recovery (saving your recorded programs and OnePass options).
How do I reset my v6 box?
How do I restart my TiVo 4k?
How do I fix my TiVo box?
Can TiVo be repaired?
TiVo Repair Flat-Fee Service For Standard Definition TiVo –
One Price Fixes All TiVo Problems
. Guaranteed. Under our flat-fee repair program, one price covers whatever is wrong with your TiVo.
Why is there a blue light on my TiVo box?
| Green Power is on | Blue Transfer or download in progress Light flashes when a transfer is interrupted. See General Network Troubleshooting Tips. |
|---|
How do I test my TiVo hard drive?
- Putting Remote into IR mode.
- At restart, holding the Pause button when amber light flashes.
- Pressing the kickstart code (54)
- Green and amber lights will blink in alternating patterns if code has been accepted.
What lights should be on TiVo box?
Front of the 360 box Front of the 360 box
Standby – The LED on the front of the box lights up
white when it is on and RED when in standby
. An amber light is shown when the box is starting up.
What does orange light on TiVo box mean?
An amber (orange) light to the left of the Virgin Media logo (solid or blinking) means
you don’t have full network connectivity
. To ensure your V6 is connected to the hub go into Help & Settings > Settings > Network > Connect To The Virgin Media Service. Make sure the test doesn’t fail.
Why is the green light flashing on my TiVo box?
On the left hand side under the standby button, a light will shine green if the box is in use and red if it’s on standby. Next to that is the
Online LED light which will glow green if your TiVo box is connected to the internet and the Remote Control Light which will flash green whenever you use your remote control
.
How do I contact TiVo customer service?
Visit TiVo Customer Support online at
tivo.com/support
. If you have issues with missing channels, incorrect channels, or other channel lineup issues, visit tivo.com/lineup.
How do you open a TiVo bolt?
What does 2 flashing green arrows mean on Virgin box?
It could mean that
the router is working properly and that all is good
. It could also mean that the router is trying to establish a connection with another device. If the router’s lights are blinking and you’re not able to connect to the internet, try restarting your router.
