Tools for Changing a Bike Cassette
You’ll need three tools to do this:
a chain whip, a cassette lockring remover and a large adjustable crescent wrench
.
Tools for Changing a Bike Cassette
You’ll need three tools to do this:
a chain whip, a cassette lockring remover and a large adjustable crescent wrench
.
Tools for Changing a Bike Cassette
You’ll need three tools to do this:
a chain whip, a cassette lockring remover and a large adjustable crescent wrench
.
If you have external gears,
stand behind your bike and take a look at the right side of the rear wheel. There should be a cluster of gears on the right-hand side
. This is your cassette. Count the number of gears (or steps) in the cassette.
Find the tool fitting on the sprocket set. Spin the sprockets backwards. If the fittings spin with the cogs, it is a cassette system with a freehub. If the tool fittings do not spin with the cogs, it is a threaded freewheel system.
A large, thick towel
. Wrap it around your cassette, and then grip the cassette with your hand tightly. The towel will prevent the cassette from moving as you loosen the fastening ring. Still costs more than my diy chain whip made with a portion of throwaway chain, piece of leftover wood trim and a screw.
Registered.
You don’t need a chainwhip to install a cassette
, but you will to remove one.
Pry, but Gently
You can do that with a long, slender flat-tip screwdriver, or anything of fairly similar shape.
Hold down the eject button, and when the tape begins to rise, slide your prying tool underneath it and lift gently
. Your tape should pop the rest of the way up so you can remove it.
One of the common reasons for a stuck tape could be a
defective eject button
. In that case, you need to help the eject button a little bit. So, get a flat-head screwdriver or something similar to that shape. Next, press the Eject button, and the tape will start to rise.
What is the main difference between freewheel and cassette hub? The freewheel is a single-unit and the act of pedaling tightens the freewheel to the hub. Whereas the cassette hub is a set of gears (cogs) that slides onto a cassette and is held in place by a lock ring.
Yes, you can
. If a smaller cassette suits your needs and terrain more, there’s no reason why you can’t put it on your bike. It doesn’t affect the function of your bike or drivetrain in any way and shifting will not be different.
In some cases,
it is possible to run a cassette from a different brand than the rest of your drivetrain
. SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.