cutting the chain isn't that hard,
you can use a grinder or dremel to grind off the top of two pins so that a plate can be popped off then just slide out the link
. usually it's easiest to grind the master link pins. most chains come with a 120 links so you may have to cut it to the desired length anyway.
How do you remove a chain link without a tool?
How do you remove a motorcycle master link?
How do you remove links from a motorcycle chain?
How much does it cost to replace a motorcycle chain?
It really depends on the motorcycle you're working on. Chains can range in price from
$20 for a plain chain for a small, lightweight motorcycle to over $200 for something like a quality O-ring chain for a bigger, more powerful bike
.
What happens when motorcycle chain breaks?
You will
loose power from your back wheel
because the chain is no longer delivering the drive the engine is giving. The engine will still be going, but you will not be able to accelerate. In fact, your motorcycle may start decelerating if you're not going down a hill at all.
How do you take off a bike chain without a chain tool?
How do you take off a bike chain without a master link?
How do you take a chain off?
How do you remove a chain link?
How do I remove a master link chain?
How do you shorten a chain?
Shortening the chain
In order to shorten the link without a chain tool,
you need an alternative tool like a hammer, pliers or thin nail
. They will assist you in pushing the pin easily. You can position the chain over a socket, and hit it with a hammer. Then, you can now pass the bolt all throughout the open holes.
Can you shorten a motorcycle chain?
What is the life of a motorcycle chain?
But chains wear out over time and need replacing. So, how often should a motorcycle chain be replaced? In general, a properly maintained motorcycle can last
20,000 to 30,000 miles
, sometimes more. But, some last as little as 5,000 to 10,000 miles.
How long will a motorcycle chain last?
On average, you can expect to replace your chain and sprocket between
20,000 to 30,000 kilometers
, less if you ride fast and hard. However, if you spot any damage to your chain or sprocket, it's better to just go and replace the prematurely-worn part right away.
Do you need to change sprockets with chain?
If you determine that your chain is constantly getting stuck and lubrication is not increasing the smoothness of your ride, it's likely time to get a new chain. However,
when you replace your chain, it's a great idea to replace your sprocket at the same time
.
How often do bike chains break?
Most mechanics agree that you should replace your chain about
every 2,000 to 3,000 miles
, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.
What's the danger of riding with a worn drive chain?
Explanation: Drive chains are subject to wear and need frequent adjustment to maintain the correct tension. Allowing the drive chain to run dry will greatly increase the rate of wear, so it's important to keep it lubricated. If the chain becomes worn or slack,
it can jump off the sprocket and lock the rear wheel
.
What causes a bike chain to break?
Chains, like anything else on your bike, can be damaged
if it gets hit hard enough
. While not as common, chains can break if they are involved in a rock strike or other impact. Impact damage to chains can be more difficult to repair than if the chain breaks due to wear.
