| ITEMIZED REPAIRS COST | Restring all Rotors Repair Single Rotor (incl. restring) Pull Slide Repair Slide Lock Solder work (ea. point) $30.00 +$20.00 each additional item | Remove Minor Accessible Dents $50.00 | All Other Dent Work $75.00/hr |
|---|
How much does it cost to repair a trombone slide?
| ITEMIZED REPAIRS COST | Restring all Rotors Repair Single Rotor (incl. restring) Pull Slide Repair Slide Lock Solder work (ea. point) $30.00 +$20.00 each additional item | Remove Minor Accessible Dents $50.00 | All Other Dent Work $75.00/hr |
|---|
How do you fix a dented trombone slide at home?
How do you fix a bent trombone slide?
How do you repair a trombone?
Why is my trombone slide sticking?
If something is bent, then the slide will stick every time. If there’s dirt or debris in the slide, then the slide will stick intermittently
. If you think you’re dealing with just a little bit of dirt, you can take your trombone apart and give it a bath with warm water and mild soap.
Do dents affect trombone sound?
Any dent that significantly decreases the size of the tubing will be an issue to the sound, intonation, or air flow of the instrument
. A special component of the trombone is the main slide, which consists of the inner and outer slides. Trombone dents can be a significant problem if located anywhere on either slide.
How much does it cost to lacquer a trombone?
| General Service Overhaul – Lacquer | Trombone (No Valves) $40-70 $480 | Slide only $60 $250 | Bell Section $250 | Trombone w/F Attachment $60-80 $950 |
|---|
How much does it cost to have a trombone cleaned?
| Service Estimate of Price | Chem Flush Cleaning $85.00 | Slide Alignment or Reconditioning $75.00 | Water Key Corks $21.00 | Water Key $35.00 |
|---|
Can you fix a dent in a trombone?
What note do trombones tune to?
The trombone is pitched in concert pitch (Bb=Bb), however it is called trombone in Bb. F-attachments should be tuned to
fourth line F
, thus allowing the bottom of the staff F (an octave lower) to be in tune in first position. Bass trombonists should tune their main tuning slide and their F attachments as above.
How do you tuning slide grease on a trombone?
What is a trombone with valves called?
Bass trombone
Modern bass trombones have one or (more commonly) two valves which are needed to provide a fully chromatic low register down to the pedal range.
Why is a trombone called a trombone?
The word “trombone”
derives from Italian tromba (trumpet) and -one (a suffix meaning “large”), so the name means “large trumpet”
.
What are the parts of a trombone?
- The Bell. Since the bell is the largest part of the trombone, even those who aren’t familiar with the instrument can probably point out the bell. …
- The Bumper. …
- The Counterweight. …
- The Mouthpiece. …
- The Tuning Slides. …
- The Valve Slides. …
- The Water Key.
Can you solder a trombone?
How do I fix the water key on my trombone?
How do you get a trombone unstuck?
Can you use WD40 on a trombone?
WD40 is a general purpose cleaner..and it is in fact a lubricant that works great in some applications…not so good in others. If you were planning on using it as a slide lube on a trumpet..
it may creep into the valves and make them gummy because it will only absorb so much water
.
Can you use Vaseline on a trombone slide?
‘Vaseline’ is fine for all slides wether brass or nickle
……
How do you lubricate a trombone?
First, clean any dirt from inside the slide, then
apply a bit of slide cream (or slide oil) on the slightly thicker end sections of the slide (the stockings)
. Do not use slide grease. 2. After applying slide cream, use a water spray bottle to moisten the slide sufficiently.
How do you fix a dent in a brass instrument?
Traditionally, dents were removed from brass instruments
using a steel ball threaded onto a rod
. The steel rod and ball are inserted into the bore of the instrument up to the point of damage. Pressure is exerted downward on the instrument while the rod is held firmly in a vise.
How do I fix a dent in my mouthpiece?
Why is trombone so hard?
Here’s Why the Trombone is the Most Difficult Brass Instrument:
Most brass instruments have valves that allow the player to play accurate pitches
. Trombone players have to maneuver a slide. This means that every player has to memorize the exact position for notes.
What is lacquer on a trombone?
Lacquer. A majority of Edwards trombones are shipped with a
clear epoxy lacquer
. A lacquered instrument will maintain its clean appearance while protecting against minor scratches and other everyday wear and tear. Lacquer is sprayed onto the instrument after it is buffed and degreased.
What does it cost to re lacquer a trumpet?
How much does it cost to re-lacquer a trumpet? It will easily set you back
$250 or more
, depending on if you want them to strip off the original lacquer.
Can you get a trumpet refinished?
The instrument replating service is sometimes an option for refinishing your instrument
. It is much less involved than an overhaul and is most often used on instruments that are in very good to excellent condition.
