Press and hold both the Home button and the side button or the top button until you see the Apple logo. If your phone doesn't turn on, follow these steps to
check your hardware and charge your phone
. You might need to charge for up to an hour. If your phone still doesn't turn on, contact Apple Support.
What causes iPhone Black Screen of Death?
Black screen on iPhone
could signal a hardware issue or caused by minor firmware problems
. A possible quick fix is to try a hard reset. For iPhone 8 or older models, press and hold the power button and home button for 10 seconds.
What causes iPhone won't turn on?
If the phone still won't come on,
there might be something wrong with the way it's charging
. Check the phone's Lightning port to make sure it isn't filled with lint or debris, and inspect your Lightning cable for kinks, breaks, or frays. If necessary, swap the cable for another. Charge the iPhone again.
Why is my phone not turning on at all?
There are several possible reasons why your phone won't turn on, from
battery failure to software issues
. But most times you can narrow it down to a few common problems, including: A drained battery. Your phone may be unresponsive because the battery is dead.
How do I force my iPhone to turn on?
Press and hold the side button until the power-off slider appears. Drag the slider, then wait 30 seconds for your device to turn off. If your device is frozen or unresponsive, force-restart your device. To turn your device back on,
press and hold the side button until you see the Apple logo
.
How do I get my iPhone to turn on?
Use the side button or Sleep/Wake button (depending on your model) to turn on iPhone
. You can use the top button (along with either volume button on some models) or Settings to turn off iPhone. If your iPhone isn't working as expected, you can try restarting it by turning it off, then turning it back on.
Why did my iPhone screen go black and won't turn on?
Issues with an app
. Malfunctions within app software can also cause iPhones to have the black screen of death. All apps are not created equal, and if your iPhones current software is not compatible with a particular app, you could get a screen malfunction. In this case, killing the app should enable your screen again.
How do I restore my iPhone in recovery mode?
- Make sure that your Mac is up to date. …
- On a Mac with macOS Catalina, open Finder. …
- Keep your device connected and wait until the recovery mode screen appears: …
- Locate your device on your computer. …
- After the Update or Restore completes, set up your device.
Why won't my iPhone turn on after it died?
If the iPhone still doesn't turn on,
it may have a dead battery or a bad charging port
. Replace the battery with a partially charged one and see if the phone will turn on. If not, there may be a power button or logic board issue. If the phone does turn on, plug it in and see if the charging indication comes on.
Why is my phone not turning on or charging?
First,
ensure the USB cable is firmly connected to the charging brick (charger), and to your phone
. Look into your phone's charging port and ensure there's no lint or dust inside it. If the port is dirty, try cleaning it first. If it's still not charging, try plugging the charger into another (working) wall outlet.
Why won't my phone turn on even though it's charged?
Try plugging your phone into a charger
—if the battery is truly drained, it won't necessarily light up right away. Try leaving it plugged in for 15 to 30 minutes or so before turning it on. If that doesn't work, you could also have a damaged charger. Try a different cable, power bank, and wall outlet.
How do you unfreeze an iPhone?
Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the side button. When the Apple logo appears, release the button
.
How do you restart a frozen iPhone?
- Quickly press and release the volume up button.
- Quickly press and release the volume down button, then press and hold the side button.
- When the Apple logo® appears, release the side button.
How do I restart my iPhone without using the screen?
- Press and release the volume up button.
- Press and release the volume down button.
- Press and hold the side button.
- When the Apple logo appears, release the button.
Why is my iPhone 11 suddenly black?
When your iPhone is stuck on black screen, it's
either due to the battery that's completely drained or it may still be alive but just couldn't get to render the actual display due to some major system flaws
. That said, both the software and hardware factors can be the underlying cause.
What do you do when your phone goes black but still works?
Plug in phone, wait five minutes, and then try to do a Force Restart
. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen. If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone.
Why does my iPhone show the Apple logo but won't turn on?
Software issues are probably the most common reason for your iPhone being stuck on the Apple logo
. Nine times out of ten, software issues are caused by either a failed software update, using an older version of the Apple iOS or having a jailbroken iPhone.
Can you restore an iPhone without using a computer?
If you can't access a computer and your device still works,
you can erase and restore your device without a computer
.
How long can an iPhone stay in recovery mode?
2. How long can an iPhone stay in recovery mode? An iPhone can stay in recovery mode for
about fifteen minutes
. After that, if no actions are performed, it will exit the recovery mode.
How can I restore my iPhone without iTunes?
Open the Settings app. Navigate to General > Transfer or Reset iPhone
. Here you will see a list of the various reset options available. If you want to erase all your data and reset your iPhone to its factory state, tap on the Erase All Content and Settings option.
