Standard refrigerator sizes range from
around 24 to 40 inches in width
, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
Are there refrigerators wider than 36 inches?
Nothing between 36-39′′
. Fridges jump from 36′′ to 42′′. If you’re going for a non-built in/integrated unit, you’ll need air clearance on either side of the fridge.
How wide is a 36 inch fridge?
Here are the dimensions of this counter-depth refrigerator: Refrigerator Size: 36 inch. Product
Width: 35.8in
.
How many cubic feet is a 36 inch fridge?
Most top-mount refrigerator/freezer units range from about 23 to 36 inches in width, 65 to 69 inches in height, and 24 to 33 inches in depth. In addition, it will have an interior volume of
between 10 and 25 cubic feet
, with between 7.5 and 18 cubic feet (the majority) in the fridge part alone.
What size opening do I need for a 36 inch refrigerator?
To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of
70′′ high x 36-1/8′′ wide x 24-1/2′′ deep
as shown at right.
How wide is a double door refrigerator?
The standard size of a French door refrigerator is
29 1⁄2 to 36 inches in width
, 68 1⁄2 to 70 1⁄8 inches in height and 29 3⁄8 to 34 5⁄8 inches in depth.
Why are 42 inch refrigerators so expensive?
Built In Refrigerators Cost A Lot Because They’re A
High End Appliance
.
Refrigerators
that are permanently built into the cabinetry cost a lot because their a high end appliance. While that’s 100% true, they’re are also high end freestanding refrigerators that are less than half the price.
Can I replace a built in refrigerator with counter-depth?
You can change a
standard-depth fridge
to a counter-depth unit without remodeling your entire kitchen, because they’re manufactured in standard sizes (though these can vary by manufacturer) and will most likely fit in your existing opening.
Does Bosch make a 42 refrigerator?
Bosch800 Series 42 in. Box Canopy Style Island Hood with Lights in Stainless Steel. No Rebates. Change Location. Understanding the differences in style, capacity and energy efficiency helps you choose the best refrigerator for your kitchen.
What size refrigerator do I need for a family of 4?
As for capacity, most manufacturers recommend
19 to 22 cubic feet
for a family of four. But if you do a big weekly shopping trip or buy in bulk, you may need more—up to 30 to 33 cubic feet.
What size refrigerator do I need for a family of 2?
Average refrigerator capacity ranges between 9 and 30 cubic feet. A family of two needs
8 to 10 cubic feet
of fresh-food space. Add an extra cubic foot for each additional family member.
What size fridge should I get?
Refrigerator capacity ranges
It varies, but a general rule of thumb is that you’ll want
4 to 6 cubic feet (cu. ft.) of refrigerator
space per adult in your household, along with a little bit of extra contingency room. With full-size refrigerators ranging from 10 to 32 cu.
How much space do you need to open a fridge door?
Appliance says you need to take clearance into account. You should allow for
a 1⁄2 inch to 1 inch of extra space
between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.
How much clearance do you need for a refrigerator door to open?
When the door is open, is there enough space on the hinge side for the door to open without hitting your walls? If there’s not
about 2-inches
of space on the hinge side, then you’ll have to keep in mind that the refrigerator will need to be pulled out about 2-inches to make up for this.
What is the standard opening for a refrigerator?
The standard opening for a refrigerator is usually
36” wide
and the wall cabinet over it is usually 36” in width.
How do you know if a refrigerator will fit?
You want to measure the space at its narrowest points to ensure a good fit.
Measure the height of the space from the floor to the lowest point on the upper cabinet
. Make this measurement twice, first at the front of the space and then at the back of the space.
