Operating a furnace for one hour at 75,000 -100,000 Btu cost a homeowner $1.12 – $1.49 based on last month’s national average natural gas rate. By comparison, a natural gas fireplace running at 30,000 Btu per hour cost only 45 cents.
How much does it cost to convert fireplace to gas?
The average cost to convert a fireplace to gas is
$3,000
, with a typical range of $500 to $5,500, depending on a range of elements, including whether you choose a vented gas insert, vented gas log, or ventless gas log.
Can you replace a gas heater with a gas fireplace?
You probably already have a
gas line
to service your furnace, water heater, and/or kitchen stove. If you don’t, you can still add a gas fireplace to your home, but it will be more expensive due to the cost of hooking up a new gas line.
Can you put a gas heater in a fireplace?
A gas fireplace insert is used to convert a
regular wood burning masonry fireplace
into an effective gas heating system. … Natural gas fireplace inserts increase heating efficiency, maintain better air quality than wood-burning fireplaces and far outsell their cordwood counterparts.
Is it more efficient to use gas fireplace or furnace?
When comparing the most efficient options in both categories (gas furnaces and gas fireplaces), it really comes down to what you’re trying to accomplish. If you want to heat a single room, a fireplace is going to do a better job of that. However, if you want to heat multiple rooms,
then a furnace will be better
.
What is difference between gas fireplace and gas insert?
A gas insert is installed within an existing masonry, wood burning fireplace. A gas insert is
smaller than a gas fireplace
to allow it to fit inside of the opening of an existing wood burning fireplace. … A gas insert can get much hotter on the outside (no, not that hot) than a gas fireplace.
Does gas fireplace increase home value?
A homeowner can often recover over 100 percent of the expenses associated with adding a fireplace upon selling their home. According to the National Association of Real Estate Appraisers, adding a fireplace
to home can increase the resale value of the home by as much as 6-12 percent
.
Is a gas fireplace worth it?
A gas fireplace offers a range of
benefits over burning wood
in your home, including the ability to instantly turn on, control and turn of the heat from the fire. The advantages of having gas fireplace can outweigh the disadvantages in many scenarios, making a gas fireplace a worthwhile investment for your home.
Can I leave gas fireplace on all night?
DON’T leave the unit on overnight
. DO leave the flue open so that excess carbon monoxide is vented. The main concern with a gas-burning appliance is the exhaust of carbon monoxide and leaving the unit on overnight is simply risky.
Do gas fireplaces use a lot of gas?
Most of the heat that is produced will go up the chimney in this case. For the equivalent in a gas insert or gas fireplace, a large could use about
40,000 BTU/hour
and in this case would cost about $0.40/hour to operate for natural gas and about $1.31/hour for propane.
Can you get carbon monoxide poisoning from a gas fireplace?
Yes, gas fireplaces are one potential cause of carbon monoxide poisoning
. While there are many potential sources of such exposure, including certain appliances and devices, motor vehicles and wood stoves, gas fireplaces are a common culprit.
Is it OK to leave the pilot light on in a gas fireplace?
If you leave the pilot light on for long periods without turning on the main burner, a white film can develop on the glass. This is a sulfur byproduct of the burning pilot, and if left uncleaned, it can etch the glass. For
natural gas, I’d leave it on
. If it’s propane, I’d turn it off and take the risk.
How efficient is a gas fireplace?
The Benefits: Gas fireplaces burn at
about 50 to 90 percent efficiency
. Compare that to a wood fireplace, which offers roughly 10 to 30 percent efficiency.
What kind of gas is used for a gas fireplace?
Should you use natural gas or
propane
? Gas fireplaces can burn either type. Natural gas is less expensive and produces about 5 percent more heat. Choose propane where natural gas isn’t available.
What should I look for when buying a gas fireplace?
- Wall-thermostat or remote controls. …
- Variable-flame height adjustment.
- Built-in fan options (believe it or not, the fans are not always standard!) …
- LED lighting for realistic effects – subtle lighting helps the embers and coals look so realistic. …
- Pilot light vs. …
- Battery back-up.
How much does a gas insert cost?
A gas-burning fireplace insert heats 1,000 to 3,000 square feet, depending on its size. Talk to your insert dealer about the size of your existing fireplace and what heating capacity you can expect from an insert. Inserts cost
$3,000 to $4,000
, including installation and a chimney liner.
