Board and batten is a siding and paneling style that uses narrow strips of wood placed over the joints of wide boards for a geometric, layered effect.
What siding is used for board and batten?
Most common types of lumber used in board and batten siding are: Cedar . Pine . Redwood .
Is board and batten wood siding?
While board and batten siding is typically wood , it can be made from vinyl, fiber cement or steel.
Is board and batten siding wood or vinyl?
The materials you can choose from for board and batten siding include wood, vinyl, steel, and fiber cement . ... Wood is typically for homeowners who want a rustic look. Vinyl is affordable and durable. Steel provides excellent durability.
Is board and batten exterior expensive?
The low installation cost makes it a no-brainer to hire a professional to install board and batten siding on your home. For vinyl material, you will typically see a board and batten siding cost of anywhere between 2 and 7 dollars per square foot . This comes out to about $10,500 for a home of 1,500 sq ft.
Does board and batten add value?
Having a sound exterior is a crucial investment that should be tended to before cosmetic repairs! Crown moulding, board and batten, plank walls, beadboard, and trim all add character and charm to a home and give it a custom, “high-end” look.
Is board and batten cheaper than metal siding?
Metal Siding Cost
Aluminum siding costs about $3 to $6 per square foot, including installation – slightly less than board-and-batten siding. Steel siding, on the other hand, is more expensive, ranging from $7 to $8 per square foot.
Is board and batten timeless?
Today, board and batten is primarily used to give off a relaxed, traditional look , bringing a timeless elegance to the exterior of homes.
Can you use pine for board and batten siding?
Use the pine, lots of houses and barns have pine siding and it holds up fine. I have had customers mix pine and cypress and after it weathers a bit you could not tell the difference.
What wood is best for board and batten?
Cedar is a good lumber choice because it is soft; harder wood, such as pressure-treated pine, will not seal as well and is more likely to crack. Board-and-batten can be installed onto solid plywood or OSB sheathing. If your sheathing is not solid, you will need to first attach horizontal furring strips.
Is board and batten more expensive than horizontal siding?
Vertical vinyl siding is most often manufactured to look like board-and-batten or tongue-and-groove. ... You can expect to pay between $3 and $8 per square foot for vertical vinyl siding (including installation). Horizontal vinyl siding will cost a bit less — $2 to $6 per square foot — as it requires less labor to install.
Is board and batten more expensive than stucco?
While stucco materials and labor averages $5.00 to $9.00 a square foot to install, Hardie board siding comes in at an average of $10.00 a square foot for materials and installation.
How long does board and batten last?
Many manufacturers mold their siding to resemble wood. You can expect your vinyl board and batten to last for a minimum of 25 years .
Is Hardie board cheaper than wood?
Cost. Neither wood siding or fiber cement are the cheapest options in home siding . Fiber cement generally costs slightly more than vinyl siding, at $3 to $4 per square foot for materials. ... You will need to paint or stain cedar siding every 3-5 years, and periodically repair or replace the shingles or panels.
Is vertical siding more expensive?
When considering the cost of installation, vertical siding is more expensive and time -consuming to install than horizontal siding because furring strips are placed underneath first to ensure that the siding is aligned properly and smoothly.
How far apart should exterior board and batten be?
Studs are usually located every 16-inches or every 24-inches , depending on your home and frame. Position the boards so that they cover 48-inches at a time, and nail either 16 on center or 24 on center to ensure a secure and successful installation.
