If you get more than five inches of rain in an hour, or if your pool wasn’t properly designed with sufficient overflows, then your pool
may overflow
, which can put you at risk of water getting inside of your home and causing serious damage. As your pool fills with water, it may overflow into your yard.
Is it OK for pool to overflow?
If the pool overflows, now
only will the pool chemicals be diluted
, but they may contaminate the pool deck and surrounding landscape. Removing excess water quickly is important to prevent this.
What do you do if your pool overflows when it rains?
- Siphon the water to lower the levels. Do be aware of where you’ll put the water. …
- Use your pump drain. Some pumps have drain spigots, and using this is much easier than siphoning. …
- Try a submersible pump. …
- Call us.
What happens if you overfill your pool?
The quick answer is no. You don’t need to drain your pool, as there is no risk to your pool by it being full. The only thing you lose with a pool filled to the rim is your
skimmer’s surface cleaning action
. Overall, it still draws water and the equipment is just fine.
Will my pool overflow in heavy rain?
The pool will only overflow by the amount of rain in excess of the amount of rain needed to fill the pool to the top
. So if your pool is the normal 3” below the top, the rain would need to exceed 3” before any additional rain would be available to overflow onto the deck.
Does backwashing remove water from pool?
The backwashing process
reverses the flow of water to flush out contaminants from
a swimming pool filter. It should be carried out until water runs clear through the waste line.
Should I turn my pool pump off when it rains?
To prevent potentially dangerous electrical issues, it’s imperative that you turn off the power to your pool equipment — such as pumps, motors, filters, heaters, chlorinators, and lighting fixtures. Even if you turn off the power to your pool equipment,
it can still be damaged by wind, rain, and debris
.
Do I need to lower the water level in my pool?
Water Level: The water level in your pool should be kept at or just below the skimmer when the cover is in use. The water level
should not be lower than 18′′ from the top of the pool
. … Check pool water level periodically over the winter, adding or removing water when necessary with your garden hose or cover pump.
How do you know if your pool is overfilled?
- Pool is not completely level and the excess water has placed an increasing amount of strain on the sidewalls. …
- The water is flowing out of the top of the skimmer or over the sidewalls.
How often should I add water to my pool?
This will vary depending upon several factors including: weather, if the pool is covered or not, bather load, and if it is heated or not. With pools that are covered, a good rule of thumb is that they should not have to be
refilled more often than once every 2 weeks
.
Can pool water level be too high?
What happens if your swimming pool water level is too high? If your pool level is too high,
your skimmer won’t work as efficiently
. … In most cases, pool owners don’t need to do much if the water is a little on the high side.
When should I drain my pool?
Even with proper and regular pool maintenance, it’s often necessary to drain your pool — completely or partially —
every 3-5 years
. Draining your pool often isn’t necessary, especially if you’re following a proper and regular maintenance program.
How does an overflow pool work?
With an overflow pool, instead of having the water sucked in by the skimmer, it is collected in a “water tank”. … Since the pool is already full,
the incoming water automatically spills over into the water tank
, creating the overflow effect.
Do you vacuum a pool on backwash or waste?
Don’t use any metal object that can rust as a weight. 8. Vacuuming pool with filter valve in
“backwash” position
. When a pool is vacuumed with the sand filter valve in the “filter” position, the dirt and debris that passes through the pump ends up inside the filter on top of the bed of sand which is where you want it.
