It is important to just look straight ahead as if in a tunnel, instead of scanning the environment around you while driving. ... Being overly cautious during a driving test is not good as it can result in stopping the normal flow of traffic. You should always make sure you proceed when it is your turn to do so.
Which three gauges are the most important to be aware of?
| Term Driving is a.... Definition privilege granted by the state, not a right. | Term Which three gauges or indicators are the most important to be aware of? Definition Coolant temperature gauge, oil pressure gauge, and battery voltage gauge |
|---|
Why is it important to look for open zones rather than problems before going through an intersection?
Stop less, keeps your front zone open , wait less time, less likely to be rear-ended. How will knowing the point of no return help you control intersections that have traffic lights? Knowing this helps you decide whether to go or stop at a yellow light.
Why is it better to drive on the main streets instead of side streets?
Major streets and “thru” streets are designed to provide better traffic flow than smaller streets . They have center dividers, two or more lanes in one direction, designated lanes for left turns, and traffic signals.
When looking for a gap to merge on the expressway you should check your mirror and then check your blindspot by?
When you are going to change lanes (like merging into a bike lane, or entering a center lane or a left turn lane), you should always signal 100 feet before you start to change lanes, then check your mirror and turn your head to look over your shoulder to check your blind spot, before making the lane change.
What are the three categories of signs?
Signs are divided into three basic categories: Regulatory, Warning, and Guide signs . Most signs within each category have a special shape and color.
What are the 3 questions you should always ask before passing another vehicle?
- Is it legal?
- Is it safe?
- Is it worth it?
How far ahead should you look when you are driving on a highway?
You should stay aware of conditions on the road ahead in order to avoid the need for any last-second maneuvers. Looking 10 to 15 seconds ahead of your vehicle is a good habit. 31.97 % of our users get this question wrong.
What should you do in case of a brake failure?
Pump the brake pedal fast and hard to build up brake fluid pressure . You will know in three to four pumps if the brakes will work. Do not pump antilock brakes. ... Apply the parking brake, but be ready to release it if the car begins to skid.
What are the rules for merging traffic?
According to the California Driver Handbook, drivers must enter the freeway at or near the speed of traffic and should not stop before merging into traffic unless it is absolutely necessary . Drivers are also discouraged from trying to merge into small gaps to avoid following too closely.
Where do you look for blind spots?
Blind spots are the areas to the sides of your car that can't be seen in your rear mirror or side mirrors – to make sure these spots are clear before changing lanes, you'll have to physically turn around and look to see what kind of crazy stuff is going on out there.
Do you look over your shoulder when changing lanes?
It is very important to check behind you before you: Change lanes. Look over your shoulder to make sure you are not getting in the way of vehicles in the lane you want to enter. ... Backing up is always dangerous because it is hard to see behind your vehicle.
Is passing on the left illegal?
The left lane is reserved for passing where the speed limit is 65 MPH or faster. It is illegal for a person to drive in the left lane , where the speed limit is 65 MPH or more, unless they are passing another vehicle, or the volume of traffic does not permit them to safely merge into a non-passing lane
Is passing on the right illegal?
Passing on the far right or slow lane is legal , as long as you are not in an exit-only lane before an offramp or crossing over the solid white line onto the shoulder. But it can be risky, especially when motorcyclists are splitting lanes.
What are some problems associated with city driving?
- Sudden changes in road width, driving rules or speed limits. ...
- Uneven or damaged road surfaces caused by high volumes of traffic. ...
- Frequent intersections that require stop-start driving and increase the risk of being involved in a collision.
