In most cases,
you should not install electronics above wood-burning stoves or gas fireplaces and inserts
because they produce massive amounts of heat. That heat could severely damage your tv or other electronic devices.
How far should a TV be above a gas fireplace?
How High Should a TV Be Mounted? Above a fireplace, it’s relatively easy to meet the general recommendation of
60-80 inches from the floor
.
How do I protect my TV above a gas fireplace?
A well placed Fireplace Mantel or a Fireplace shelf
can act as a buffer to help protect your heirlooms and TV from the heat radiating up from the front of your fireplace. It can offer only some protection though, to delicate electronics and the plastic casing around your television.
Does heat from fireplace damage TV?
The heat from a fireplace can definitely damage a TV
, especially if the TV is too close or if nothing is blocking the heat from reaching the TV. If your TV is getting too hot from your fireplace, consider installing a mantel or switching to a gas or electric fireplace for lower heat output.
Where do you put your electronics when TV is above fireplace?
You can
place it on the mantle if it’s wide enough
. However, if there’s not enough room, you can also have the cables run to a box in another room. Another thing that works is building a shelf just for your cable box. However, you could also ditch your cable and subscribe to a streaming service instead.
How can I hide my TV wires without cutting the wall?
- Make a Wood Frame and Cover It in Fabric. …
- Install a Raceway and Paint It the Same Color as the Wall. …
- Hide TV Cords Behind Other Objects. …
- Turn Your TV Wires Into a Wall Art. …
- Conceal TV Wires Behind Wall Trim. …
- Camouflage TV Cords and Cables.
How much does it cost to install a gas fireplace?
The average cost to install a gas fireplace is
about $4,500
with average prices ranging from $2,500 to $10,000 in the US for 2020 according to Thumbtack.
How far does a mantel need to be above a gas fireplace?
As a general rule, the mantel is placed
about 12 inches above the fireplace opening
. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.
How hot can a TV get before damage?
You can check with your manufacturer, but most TVs can safely withstand
up to 125°F.
Since the TV generates it’s own heat you want to keep the ambient temperature around it several degrees below that.
Where to put your TV when you have a fireplace?
As far as TV placement, you will want to mount your TV
in the corner where your fireplace wall and a perpendicular wall meet
. This, again, ties back to simplifying furniture arrangement by keeping key points of focus in closer proximity.
Where does the sky box go when TV is above fireplace?
I recommend
the HIDEit Sky Q wall mount
if you want to put your Sky Q box behind the TV. To hide the box, you simply mount the TV over the top of the wall, and slot it inside.
How do you lay a room with a fireplace and TV?
For this, you place your TV and fireplace on perpendicular walls. Depending on your room shape or preference, you can then
position your sofa opposite either the fireplace or the TV
– or both, if you have the space to create two seating areas. This living room layout for your fireplace and TV fits well in square rooms.
How do you hide the cords on a wall mounted TV?
- Use hooks behind your furniture to hide TV wires. A DIY-hack for packing away all of those pesky wires hanging from your wall-mounted TV is to use plastic hooks/pegs. …
- Use cord covers to hide TV wires. …
- Hide TV Wires Behind the Wall. …
- Get the Best of all Worlds with MantelMount.
Is it safe to put TV wires behind wall?
A power outlet extension with building-safe wire: Under no circumstances should you be running the power cables to your TV behind the wall. These aren’t up to code and they’re fire hazards to boot. … The
only power cable you should run behind your wall
are ones that come in a code-friendly kit.
Is it safe to hide TV wires in wall?
⚠️In most states, simply drilling holes and snaking power cords behind the wall
violates the national fire code
. An in-wall power kit utilizes low-voltage wires, so it’s code compliant. The kit even includes a hole saw for drilling power-module holes through the drywall.
