Is it safe to drive with an SRS light on? … It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your
safety system isn’t working at 100%
and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.
What can cause the airbag light to come on?
The most common cause for the airbag light coming on is that
the airbag system is deactivated or turned off
. … There may be an issue with the crash sensors or other airbag component. Alternatively, the sensor in the passenger seat that determines whether that airbag should be active or not may be faulty.
Can I drive with airbag warning light on?
If the airbag light is on, it means that
the airbag will not be able to deploy in the event of an accident
. This is a dangerous proposition, and it means that you should avoid driving if at all possible in that vehicle.
How much does it cost to fix airbag light?
This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up
to about $600
.
How do I get my airbag light to turn off?
- Turn on the ignition switch with your car key. …
- Wait for the airbag warning light to turn off. …
- Turn the ignition switch of your car back off for a little longer than three seconds.
- Repeat steps 1 through 3 twice to make three times total.
Can a blown fuse cause the airbag light to come on?
Blown fuses can definitely cause the airbag light to come on
. … When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.
How do I know if my airbag sensor is bad?
You can easily tell if the sensor is functioning
if the airbag warning light on the dashboard is illuminating every time you start the vehicle
. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.
What do you do when your airbag light comes on?
The best thing to do if your airbag light has come on is to
take the vehicle to a mechanic right away
. A mechanic can help you to deal with the airbag light by examining the system with the help of the car diagnostic internal system.
Where are airbag sensors located?
The location of airbag sensors differs from car to car. The most common location is
inside the front bumper or fender
, however many modern vehicles have several airbag sensors. They can also be found inside the engine bay, in the passenger seat area, or even in the rear or sides of the vehicle.
Can you replace airbags yourself?
For those of you who want to replace airbag units on your own, you’ll be happy to hear
there are no restrictions on this kind of work
. You don’t need to go to any sort of authorized dealer or mechanic to fo this work, except when the work butts up against your car’s warranty.
What does the airbag light look like?
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with
a large circle (the airbag) in front of the person
. It will normally light up briefly each time you start your vehicle, and then go off.
Will removing fuse disable airbag?
Simply pulling the airbag fuse may not disable the airbags
. Many ACMs utilize an internal battery to ensure deployment even if the power is cut.
Do all airbags go off at once?
Air bags can only deploy once
, so make sure you replace used air bags right away after a crash, only at an authorized repair center, and before you drive the vehicle again.
Is there a fuse for the airbag?
The airbags won’t be activated by the fuse
. The whole system on most cars is inoperative if the service air bag light is on.
How do you reset airbags?
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
How do you check airbag codes?
The airbag codes are double digit numbers. To read the codes,
count the number of times the light flashes, wait for the pause and count the flashes again
. For example, two flashes, a pause and four flashes mean that your airbag system’s problem is a code 24.
