Is Polyaspartic Better Than Epoxy?

by | Last updated on January 24, 2024

, , , ,

Durability. Epoxy is very durable, but it is still vulnerable to abrasion. Polyaspartic, meanwhile, is more flexible, and won’t chip, scratch or scuff. It’s

definitely more durable

.

What flooring is better than epoxy?

Generally, a

polyurethane floor coating

is highly flexible and elastic, while epoxy flooring is harder and more brittle. This makes polyurethane coatings more resistant to scratches and similar damage and is why you’ll often find urethane resin floors in heavy traffic areas – such as multi-storey car parks.

How long does polyaspartic last?

Polyaspartic coating cures very fast, with a pot life of

10 to 120 minutes

depending on the formulation. Typical polyaspartic floor coatings are applied in just two to three coats. This means a complete flooring system could be installed in one day and returned to service the next.

Is polyaspartic more expensive than epoxy?

While

polyaspartic coatings tend to be more costly than epoxy coatings

, we suggest that their overall score in the “pro” column warrants serious consideration for your project. Note, however, that these finishes are not mutually exclusive. A polyaspartic finish coating can be applied over an epoxy primer.

Is polyaspartic stronger than epoxy?

Durability. Epoxy is very durable, but it is still vulnerable to abrasion. Polyaspartic, meanwhile, is more flexible, and won’t chip, scratch or scuff. It’s

definitely more durable

.

Can you put polyaspartic over epoxy?

Can Polyaspartic Coatings be used over an Epoxy Coating?

Yes

, Polyaspartic coatings exhibit superior inter-coat adhesion with epoxy coatings. For old epoxy floor coatings that are still well adhered to the substrate, an installer can apply a new polyaspartic top-coat over that area.

How long will an epoxy garage floor last?

Typically, epoxy flooring lasts

2 to 3 years in heavy traffic

. Commercial properties—like garages, restaurants, or factory spaces—with lots of daily foot traffic can expect this experience. However, with proper care and maintenance, your epoxy flooring may last much longer.

How much does polyaspartic coating cost?

OGI polyaspartic garage floor coating cost starts at

$8.50 per square foot

. We also offer many discounts for installations in spaces 600 square feet or bigger.

How many coats of polyaspartic do I need?

Installers commonly apply polyaspartic coatings in

two or three coats

when used on garage floors. The first penetrates and seals the concrete and serves as a primer for subsequent applications. The second layer is often pigmented and serves as the bed for color chips or other decorative additions.

Can you recoat polyaspartic?


Yes

, polyaspartic coatings can be applied on top of epoxy-coated surfaces. … Following this, the floor can be recoated with a polyaspartic coating.

Will epoxy floors crack?

Do Epoxy Floors Crack?

Epoxy floors are very rigid

. As a material, epoxy has very little flexibility, so slight shifts in the foundation can lead to cracks forming in an epoxy coating, leaving you with cracked floors that are difficult to repair without recoating with a new layer of epoxy–an expensive proposition.

How much does it cost to epoxy 2 car garage?

Epoxy garage floor cost is $2.50 to $9.00 per square foot. The average epoxy flooring cost is $6.55 per square foot or

about $3,050

for a two-car garage. This cost includes acid etching of the concrete, two coats of material and decorative flakes.

How much does it cost to epoxy a two-car garage floor?

Typical Epoxy Flooring Costs

A two-car garage is normally between 400 and 500 square feet, so the total cost averages

between $1,200 and $6,000

.

What is the longest lasting garage floor coating?


An epoxy coating

is far superior to paint and can last for years, but it requires that that you acid etch or grind the garage floor first before application. This process causes many of the DIY crowd to shy away from the benefits of epoxy.

Is polyaspartic scratch resistant?

Polyaspartic coatings outperform Epoxy & Urethane Coatings.

They’re also

more scratch resistant

, more flexible, won’t yellow if exposed to sunlight, and have much higher build properties. … And because most polyaspartics are 100% solids, they have fewer or no VOCs at all.

Is polyaspartic coating slippery?

Even at 3 to 5 mils in thickness, polyaspartic coatings

can be very slippery when wet

. The material will meet the ASTM coefficient of friction when dry, but will not when wet. This is especially important to consider if they are going to be used on exterior surfaces or on surfaces that may get wet periodically.

Sophia Kim
Author
Sophia Kim
Sophia Kim is a food writer with a passion for cooking and entertaining. She has worked in various restaurants and catering companies, and has written for several food publications. Sophia's expertise in cooking and entertaining will help you create memorable meals and events.