The pulley shaft will commonly move
in and out of pump body
even on brand new units, I've seen 1/8′′ before. Normal.
How do I know if my power steering pump pulley is bad?
- Burning smell from engine. A burning smell from the engine means the belt is not tight enough or the power steering pump pulley has seized. …
- Choppy steering. …
- Steering fails completely.
Is the power steering pump pulley supposed to be loose?
If it's loose, the
hole is hogged out
and you need a new pulley and maybe the pump too if the shaft is damaged and you can't press a pulley on tightly. It's not supposed to spin or slip, it should be really tight.
How much play should be in power steering pump pulley?
prolly
about 1/4 inch or so
is normal in and out play of the shaft from what I've seen, and zero play up and down.
Should power steering pulley have play in it?
End play in the power steering pump is normal
. Check all of the other pulleys for roughness when the belt is off. If the tensioner is moving it will make noise also. Check for cracks in the belt ant debris in the pulley grooves if this is occurring.
How do I know if I need to replace my power steering pump?
- Your Car Makes a Whining Noise Any Time You Turn the Wheel. …
- Your Car's Steering Wheel Is Slow to Respond. …
- Your Car's Steering Wheel Is Stiff. …
- Your Car Makes Squealing Noises When You Turn the Key in the Ignition. …
- Your Car Makes Groaning Noises.
What does it sound like when your power steering is going out?
Among the common faulty power steering pump symptoms are
whining noises
that coincide with engine speed. The power steering pump is driven off the engine via a belt. If you have a bad pump, it could whine the moment you turn your engine on. … Whining noises are often caused by a low fluid level or worn out pump.
Can you drive with a bad power steering pulley?
Yes, you can drive it home,
you just won't have any power steering
. Expensive is relative to the value of the car, but in my experience, it's usually not too bad.
How much does it cost to replace a power steering pump pulley?
Depending on your vehicle's year, make, and model, you can buy a replacement power steering pump pulley for a price that falls anywhere
between $15 and $160
.
Can you replace the pulley on a power steering pump?
Once the power steering pump has been removed, you
can remove the old pulley
. In order to successfully remove the power steering pump pulley, you'll need to use the right tool. This is often referred to as a pulley removal unit.
Why is my power steering pulley wobbling?
To check,
you can remove the belt that drives the PS pulley and see if the pulley spins freely
. If it does, you probably have a failed PS pump and need to replace it. If the pulley is still straight, you can reuse it, but you'll need a new key too.
What causes a wobbly power steering pulley?
The
pump
may have failed or be leaking as well. If the pump was leaking onto the pulley, the buildup would cause the pulley to fail. … This component should keep the slack tight on the pulley. You will want to make sure the tensioner is working as well.
How much should it cost to replace a power steering pump?
Power steering pumps are essential to the operation of the car cars with power steering. The job can be costly: between $100-$200 for a new power steering pump if you DIY and
around $500
to get it done by a mechanic. That said, it is not nearly as expensive as replacing your vehicle.
How many hours does it take to replace power steering pump?
Removing the Power Steering pump should take
less than two hours
, depending on the equipment that may need to be removed to get to the power steering pump.
What happens when power steering pump goes bad?
If the pump fails, though, it'll be
noticeably harder to turn the steering wheel at lower speeds or
when stopped, and you might hear some odd noises or notice a leak. A faulty power steering pump can cause a number of problems.
