Which Engine Oil Is Best For Honda Unicorn 160? Recomemded Oil specification for the HONDA CB UNICORN 160 is SAE-10W-50. 1.2 liters is the recommended capacity of oil. Any semi-synthetic oil should do for your bike. Which engine oil is best for Honda Unicorn? The recommended engine oil grade for Honda Unicorn is SAE 5W-30
What Kind Of Oil Does A 1992 Jeep Cherokee Use? Mobil 1 Extended Performance Synthetic Motor Oil 5W-30 1 Quart. What oil does a 1992 Jeep Cherokee take? Viscosity:10W-30 (Above -18) 5W-30 (Below 16) Capacity: 6 quarts. . . . (with filter)After refill check oil level. Torque: 30 ft/lbs (Oil Drain Plug) What kind of
Can I Use 10W30 In A 4 Cycle Engine? 10W30 is a common motor oil grade suitable for many lawn mowers. Your owner’s manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines. Any brand of oil that’s suitable for cars or trucks
Can You Put 10W30 In A Honda ATV? Can you put 10W30 in a Honda ATV? The engines are machined so that the chosen viscosity is most effective. In the example recommendation above, the manufacturer requires grade 10w30, so depending on the start temperature, 0W30, 5W30 or 10W30 would be good choices. Can I use
Can I Use 20W50 Instead Of 5w30? Can I use 20W50 instead of 5w30? 20W-50 is thicker than 30 weight oils, which can cause wear and tear on newer or older cars because it takes time before they flow freely through all cylinders at once; this means that you should only substitute one grade up
Can I Use 10W40 Instead Of 10w30 In My Generator? Can I use 10W40 instead of 10w30 in my generator? The short answer is yes. Because both oils are formulated to give the same performance, it will be safe for you to use either oil. Some differences between the two oils include viscosity and base
Can You Use 10w30 Instead Of Hydraulic Oil? Can you use 10w30 instead of hydraulic oil? Description. Premier UTTO 10W-30 is a multifunctional transmission and hydraulic fluid for tractors and plant. Can you use 30 weight oil in hydraulics? “It is a common practice in the construction and mining industries to use engine oil SAE